Through the use of this new ink, more versatile devices on paper or plastic can be made at a rate of 300 per minute, at a very low cost.
said Rupp. his is extremely important knowledge for materials science which will be useful in refining the way the storage operates
If the number of zinc ions increases following transient severe brain damage, these ions dock in greater numbers onto a switch, the so-called metal-regulatory transcription factor 1 (MTF1.
Researchers found that sections of metal can be made to either promote bubbling (the two rectangles at the edges)
simply by switching the polarity of voltages applied to the metal. Image courtesy of the researchersthe system
or repelled by, a metal surface by changing the polarity of the voltage applied to the metal.
in turn, allows control over the rate of heat transfer between the metal and the liquid.
Unlike small chemical tablets that dissolve in water and leave a chlorine aftertaste, Madidrop is made of a continuously reusable ceramic that is simply placed in a water vessel,
Biological Crystallography and Chemical engineering Science. The chemistry of sequestering works this way: The enzyme, carbonic anhydrase, catalyzes a chemical reaction between carbon dioxide and water.
made of a silicon-like material called an elastomer, to easily remove the sensors, made of gold and chromium, from the silicon wafer.
Led by U. of I. materials science and engineering professor Jianjun Cheng, the researchers published their findings in the Proceedings of the National Academy of Sciences. hen you have an infection,
In this stage a reflective metal layer ends up being on the bottom. In this structure coming light is blocked not by any metal layers or other materials.
and then determined the structure employing synchrotron protein crystallography at the Advanced Photon Source, a DOE Office of Science User Facility (both at Argonne).
The flexible, carbon nanotubeaced polymer detects pressure and translates the sensation into pulses of electricity that can be interpreted by the mammalian nervous system,
Thermoelectric graphene composite, with graphene fragments ringed in the 2 m-scale image Internal combustion engines lose about 70 per cent of the energy from their fuel as heat,
and Robert Freer has found that making it into a composite with grapheme could be advantageous.?
Other graphene-related automotive research at Manchester includes using the material in composites for lightweight bodywork
Previously, Salahuddin and his colleagues had discovered that passing a current through the rare metal tantalum creates polarity in magnets without an external magnetic field.
The results, published in the journal Bioinspiration and Biomimetics, describe the array as consisting of five superelastic wires made from nitinol, an alloy of nickel and titanium.
nonvolatile computer memory, said James Tour, professor of materials science, nanoengineering and computer science at Rice university. While current flash technology requires three electrodes per circuit,
The paper, tretch-Triggered Drug Delivery from Wearable Elastomers Containing Therapeutic Depots, is published online in the journal ACS Nano.
#K scientists create magnetism in nonmagnetic metals Scientists at Leeds University have discovered a method to create magnetism in metals that aren naturally magnetic,
opening up the possibility of using a range of abundant metals for magnetic applications. The study, published in the journal Nature, details a way of altering the quantum interactions of matter
However, only three metals iron cobalt and nickel-are naturally ferromagnetic, meaning they remain magnetic in the absence of a field. aving such a small variety of magnetic materials limits our ability to tailor magnetic systems to the needs of applications without using very rare
or toxic materials, said Tim Moorsom from the School of Physics & Astronomy at Leeds University,
co-lead author on the paper. aving to build devices with only the three magnetic metals naturally available to us is rather like trying to build a skyscraper using only wrought iron.
and make steel? In the new study, the researchers have shown how to alter the behaviour of nonmagnetic materials by removing some electrons using an interface coated with a thin layer of the carbon molecule C60,
which is also known as a uckyball The movement of electrons between the metal and the molecules allows the nonmagnetic material to overcome the Stoner Criterion
and antifouling Researchers from the Harvard John A. Paulson School of engineering and Applied sciences (SEAS) have developed a new coating for steel,
It was developed in the lab of materials science professor Joanna Aizenberg, whose team has been working on Slippery Liquid-Infused Porous Surfaces (SLIPS) since 2011. o far,
The coating is applied using an electrochemical technique that deposits an ultrathin film of tungsten oxide islands on to the steel.
and the steel retains both its durability and its antifouling properties. During testing, the team scratched the material with stainless steel tweezers, screwdrivers, diamond-tipped scribers
and pummeled it with hundreds of thousands of hard, heavy beads. A variety of liquids was applied then to the material to test its repellency,
with the tungsten oxide actually making the steel stronger than steel without the coating. It is claimed the material could have a wide range of applications,
the researchers designed lenses no larger than the head of a pin and embedded them within flexible plastic.
They then seeped a polymer between the silicon nanowire pillars. After the plastic support solidified, they etched away the silicon backing, leaving bull-eye patterned black silicon embedded in supple plastic.
This approach is said to have given their lenses unprecedented crisp focusing capabilities plus the flexibility that enables them to capture a large field of view.
Aluminium is also a cheaper metal than lithium. p
#Streaming helps digital music match global physical sales Fuelled by the popularity of streaming, digital music has matched
and a rigid plastic protector to cover body parts. hen you put on the sportswear, you are constrained automatically, some more than others.
the thread is coated in silicone which then solidifies. When the desired shape is completed, the tray at the bottom of the machine is slid out and the mesh
which in the early testing is silicone. As there is one continuous piece of thread which is used through the whole structure,
and cut down on the number of materials used. retty much everyone sports companies has a neoprene on the inside a nice soft stretchy material on the inside then layers of foam
the researchers describe how they used ultrasound to move tiny polystyrene beads measuring only 3mm across
#Boffins have made optical transistors that can reach 4 TERAHERTZ Aluminum-doped zinc oxide is the key to building faster, optical chips, according to researchers at Purdue University, Indiana.
The use of aluminum-doped zinc oxide (AZO) opens up the opportunity for both. It is aimed very much at optical switching rather than building processors,
*Expanded polystyrene particles ranging from 0. 6 to 3. 1m diameter are levitated above single-sided arrays.
The dark red polymer material is made using limonene, a compound found in orange peels, and sulphur. It turns yellow
The researchers found that the material can also remove other toxic metals from water and it safely stores the pollutants until it can be removed.
Hybrid Silica Changing Sol-Gel Supercapacitors A new material made from a common fatty acid, octylphosphonic acid,
"Our flagship product, the BCN3D Sigma, works very well with plastic, "but"chocolate is a difficult one as it has to keep a certain temperature".
--and their interactions with biological systems explains Jianjun Cheng an associate professor of materials science and engineering at the University of Illinois at Urbana-Champaign.
and his collaborators systematically evaluated the size-dependent biological profiles of three monodisperse drug-silica nanoconjugates at 20 50 and 200 nm.
Andrew Ferguson assistant professor materials science and engineering; and William Helferich professor food science and human nutrition. Story Source: The above story is provided based on materials by University of Illinois College of Engineering g
Proof of the piezoelectric effect and piezotronic effect adds new functionalities to these two-dimensional materials says Zhong Lin Wang Regents'Professor in Georgia Tech's School of Materials science and engineering and a co-leader of the research.
For the Nature study Hone's team placed thin flakes of Mos2 on flexible plastic substrates
In fact Mos2 is just one of a group of 2d semiconducting materials known as transition metal dichalcogenides all of
and his colleagues 2d materials can be stretched much farther than conventional materials particularly traditional ceramic piezoelectrics
Ryan Dehoff staff scientist and metal additive manufacturing lead at the Department of energy's Manufacturing Demonstration Facility at ORNL presented the research this week in an invited presentation at the Materials science & Technology 2014 conference in Pittsburgh.
As a result of our work designers can now specify location specific crystal structure orientations in a part. Other contributors to the research are ORNL's Mike Kirka and Hassina Bilheux University of California Berkeley's Anton Tremsin and Texas A&m University's William Sames.
At the core of this development is wide bandgap material made of silicon carbide with qualities superior to standard semiconductor materials.
The research group's first prototype a liquid-cooled all-silicon carbide traction drive inverter features 50 percent printed parts.
This marriage of materials science and biology could give birth to a flexible sensitive coating that is easy and cheap to manufacture in large quantities.
The synthetic coatings are called often polymer brushes because of their bristlelike appearance when attached to the particle surface.
To create the biological equivalent of a polymer brush the researchers turned to neurofilaments pipe cleaner-shaped proteins found in nerve cells.
By acting as tiny cylindrical polymer brushes neurofilaments collectively assemble into a structural network that helps keep one end of the nerve cell propped open
and turned it into a polymer brush by cloning a portion of a gene that encodes one of the neurofilament bristles re-engineering it such that we could attach the resulting protein to surfaces in a precise and oriented way
of which was to investigate the scattering of pulsars--the cores of dead stars--by interstellar gas.
I was surprised quite to find that the effect of scattering produced images with small lumps in the overall smooth image explained Gwinn.
The theory and observations allow us to make statements about the interstellar gas responsible for the scattering
There are different ways of interpreting observations of the scattering and we showed that one of them is right
Brighter, new energy saving flat panel lights based on carbon nanotubes Even as the 2014 Nobel prize in Physics has enshrined light emitting diodes (LEDS) as the single most significant and disruptive energy-efficient lighting solution of today scientists
Electronics based on carbon especially carbon nanotubes (CNTS) are emerging as successors to silicon for making semiconductor materials.
Scientists from Tohoku University in Japan have developed a new type of energy-efficient flat light source based on carbon nanotubes with very low power consumption of around 0. 1 Watt for every hour's operation
The new devices have luminescence systems that function more like cathode ray tubes with carbon nanotubes acting as cathodes
In recent years carbon nanotubes have emerged as a promising material of electron field emitters owing to their nanoscale needle shape and extraordinary properties of chemical stability thermal conductivity and mechanical strength.
Many researchers have attempted to construct light sources with carbon nanotubes as field emitter Shimoi said. But nobody has developed an equivalent and simpler lighting device.
Historically platinum and its alloys have frequently been used as anodic and cathodic catalysts in fuel cells
The explanation for the very high efficiency is the unique morphology of the alloy It is neither a homogeneous alloy nor a fully segregated two-phase system but rather something in between.
By advanced experimental and theoretical investigations the researchers show that the alloy is composed of metallic Pd-islands embedded in the Pd-W alloy.
This is the first time that anyone has imaged directly single dopant atoms moving around inside a material said Rohan Mishra of Vanderbilt University who is also a visiting scientist in ORNL's Materials science and Technology Division.
Takashi Taniguchi of the National Institute for Materials science; Sokrates Pantelides of Oak ridge National Laboratory and Vanderbilt University;
The DNASE an enzyme that would normally cut up the DNA cocoon is coated in a thin polymer that traps the DNASE like a sword in a sheath.
Once inside the cancer cell the cell acidic environment destroys the polymer sheath containing the DNASE.
and property said Yi Cui an associate professor of materials science and engineering at Stanford. The system can detect problems that occur during the normal operation of a battery
A typical lithium-ion battery consists of two tightly packed electrodes--a carbon anode and a lithium metal-oxide cathode--with an ultrathin polymer separator in between.
Manufacturing defects such as particles of metal and dust can pierce the separator and trigger shorting as Sony discovered in 2006.
and his colleagues applied a nanolayer of copper onto one side of a polymer separator creating a novel third electrode halfway between the anode and the cathode.
The copper coating on the polymer separator is only 50 nanometers thick about 500 times thinner than the separator itself said Wu a postdoctoral fellow in the Cui group.
The coated separator is quite flexible and porous like a conventional polymer separator so it has negligible effect on the flow of lithium ions between the cathode and the anode.
Invented by Associate professor Chen Xiaodong from the School of Materials science and engineering at NTU Singapore the science behind the formation of the new titanium dioxide gel was published in the latest issue of Advanced Materials a leading international scientific journal
in materials science. NTU professor Rachid Yazami who was the co-inventor of the lithium-graphite anode 34 years ago that is used in most lithium-ion batteries today said Prof Chen's invention is the next
To decorate the bottles manufacturers grind these special glasses together with inorganic pigments print them as pastes on the base glass and melt them on.
The basis of these novel decorative paints is a glass that consists mainly of zinc oxide.
Zinc oxide ensures that this glass already melts below 650 degrees Celsius. It therefore takes over the task that previously fell to the lead oxide.
If the glasses are heated they expand at different rates--experts speak here of the thermal expansion coefficients (TEC) for the respective Glass in order for the imprints to not flake off they have to expand similar to the glass on
But the results should apply to many different metals says Li senior author of the paper and the BEA Professor of Nuclear Science and Engineering.
Silver has a relatively high melting point--962 degrees Celsius or 1763 degrees Fahrenheit--so observation of any liquidlike behavior in its nanoparticles was unexpected quite Li says.
Hints of the new phenomenon had been seen in earlier work with tin which has a much lower melting point he says.
By contrast if the droplets were to melt to a liquid state the orderliness of the crystal structure would be eliminated entirely--like a wall tumbling into a heap of bricks.
The phenomenon of plasticity by interfacial diffusion was proposed first by Robert L. Coble a professor of ceramic engineering at MIT
For example in circuits where electrical contacts need to withstand rotational reconfiguration particles designed to maximize this effect might prove useful using noble metals
The coating repelled blood from more than 20 medically relevant substrates the team tested--made of plastic to glass
and metal--and also suppressed biofilm formation in a study reported in Nature Biotechnology. But that's not All the team implanted medical-grade tubing
The idea for the coating evolved from SLIPS a pioneering surface technology developed by coauthor Joanna Aizenberg Ph d. who is a Wyss Institute Core Faculty member and the Amy Smith Berylson Professor of Materials science at Harvard SEAS.
whose specialties range from hematology to immunology surface chemistry and materials science. This really could only happen in a place like the Wyss Institute Ingber said.
Alex Chortos graduate student in the department of materials science and engineering made the wireless device more robust and reusable.
and genetic diseases by combining the chemical specificity of the DNA with the signal readout of the metal.
#Unusual skin cancer linked to chronic allergy from metal orthopedic implant In rare cases patients with allergies to metals develop persistent skin rashes after metal devices are implanted near the skin.
Metal alloys help make orthopedic implants stronger and more durable. But people with sensitivity to these metals which include nickel cobalt
and chromium can develop chronic inflammation that promotes the development of skin cancers report researchers at Washington University School of medicine
but for some patients with sensitivity to metals they may be the best option. Similar to metal implants some dental restoration materials and tattoo inks contain substances associated with allergic reactions and cancers on the skin or in the mouth.
The work will be described by Srikanth Singamaneni, assistant professor in the department of mechanical engineering and materials science at Washington University in St louis,
and in particular metals such as gold. Localized surface plasmons of metal nanostructures result in unique optical properties with characteristics that depend upon the metal composition,
An important material used in their construction is electrical steel. Researchers have found a way to improve the performance of electrical steel
and manufacture it more efficiently using an optimized laser process. Transformers convert the standard voltage from the wall outlet into the lower voltages required by electronic devices.
To minimize the energy loss associated with this process special types of iron-silicon alloy known as electrical steel are used to make the core.
In their native state these alloys have a grainoriented structure which determines their magnetic properties.
which each crystal or grain is arranged in a regular periodic order. By heating selected areas of the material it is possible to reduce the size of the domains with the same magnetic orientation
which in turn alters the magnetic structure of the steel. This results in a lower heat development and thus reduces the material's hysteresis loss says Dr. Andreas Wetzig who heads the laser ablation
and cutting department at the Fraunhofer Institute for Material and Beam Technology IWS in Dresden describing the complex changes that take place inside the material.
While the steel sheet measuring around one meter in width moves forward at a rate of more than 100 meters per minute a focused laser beam travels at very high speed (approximately 200 meters per second) from side to side
In a further effort to reduce hysteresis loss in electrical steel the researchers have started recently working with a new type of solid-state laser:
It cuts hysteresis loss by up to 15 percent compared with the 10 percent normally achieved until now.
that of expanding the applications of their technology to electrical steel for engine components. However unlike transformer steel these materials do not have oriented a grain structure
and therefore possess different magnetic properties. This means that we cannot transfer our process one-to-one without modification explains Wetzig.
The benefits of laser processing in the case of non-grain-oriented electrical steel vary according to the working point of the specific engine or motor.
#Analyzing gold and steel--rapidly, precisely Optical emission spectrometers are used widely in the steel industry but the instruments currently employed are relatively large and bulky.
Jewelers in India are required by law to test the purity of gold using an optical emission spectrometer that analyzes the composition of the metal on the basis of the emitted light spectrum.
But goldsmiths are not the only users of these instruments the tools are more frequently found in steel foundries
and car factories where they help engineers to determine the characteristics of steel materials analyze their chemical composition
In order to analyze a piece of steel for example it has to generate sparks at regular intervals.
which it is possible to derive information on the composition of the steel sample. Experts refer to this result as a space-resolved measurement.
used X-ray crystallography to capture a three-dimensional structure of one of the conformations revealed in the Science paper.
"The antibodies used in the crystallography study are ones that we observed to stop the dance of the HIV envelope proteins,
and X-ray crystallography--can work hand in hand to help scientists describe the functions of molecules from the perspective motion,
and abetted by gelatinous sticky polymers produced by seaweed reports a research team headed by a UC Davis veterinary infectious-disease expert.
Using the parasite Toxoplasma gondii as a model they showed how these sticky polymers increase the chance that disease-causing organisms would be picked up by marine snails
Findings from the new study will be published Oct 8 in the journal Proceedings of the Royal Society B. Discovering the role that these invisible polymers play in disease transmission in the ocean is a tremendous step forward in helping us better understand
In laboratory tests the researchers discovered that the gelatinous polymers excreted by seaweed act in two ways to provide an environment conducive to transmission of infectious diseases.
First the polymers act like glue binding together waterborne organic material into larger particles in
Secondly the polymers help to form sticky biofilms which can trap the T. gondii egg cells and coat kelp on which marine snails graze.
#How metallic alloys reorganize during microscale laser melting processes: Elements of successful connections High-power lasers that can selectively cut
Researchers investigating the feasibility of 3d printed implant materials often turn to magnesium-aluminum (Mg-Al) alloys
Recently, the A*STAR team demonstrated that laser surface melting of these alloys enhances their corrosion resistance as a result of a notable enhancement in the surface concentration of aluminum.
however, to make the link between the initial alloy composition and the final product after laser processing,
which molten alloy elements are ejected into the laser plume. They positioned a thin silicon substrate perpendicular to a Mg-Al-based alloy a few millimeters from the laser firing point.
Laser pulses then generated a plume that deposited onto the silicon surface. When the researchers used a scanning electron microscope (SEM) to examine the deposits,
Zeng said the prototype lab-on-a-chip is made of a widely used silicone rubber called polydimethylsiloxane and uses a technique called on-chip immunoisolation.
and why stem-cell treatments now in clinical trials are not as effective as they could be says Krystyn Van Vliet an MIT associate professor of materials science and engineering
and it never works the first time said Krisna Bhargava materials science graduate student at the USC Viterbi School of engineering.
and materials science professor Noah Malmstadt and biomedical engineering graduate student Bryant Thompson designed computer models for eight modular fluidic and instrumentation components (MFICS pronounced em-fix) that would each perform a simple operation.
and polyurethane paint to melt ice on sensitive military radar domes, which need to be kept clear of ice to keep them at peak performance.
but can be used to coat glass and plastic as well as radar domes and antennas. This scanning electron microscope image shows a closeup of the nanoribbon network in Rice university's high-density graphene nanoribbon film.
the nanoribbons were mixed with polyurethane, but testing showed the graphene nanoribbons themselves formed an active network when applied directly to a surface.
They were coated subsequently with a thin layer of polyurethane for protection. Samples were spread onto glass slides that were iced then.
and Vladimir Volman, an engineer at Lockheed martin. Tour is the T. T. and W. F. Chao Chair in Chemistry as well as a professor of materials science and nanoengineering and of computer science.
and Edwin Thomas, the William and Stephanie Sick Dean of Rice's George R. Brown School of engineering, professor in mechanical engineering and materials science and in chemical and biomolecular engineering g
#Researchers develop harder ceramic for armor windows The Department of defense needs materials for armor windows that provide essential protection for both personnel
With the highest reported hardness for spinel NRL's nanocrystalline spinel demonstrates that the hardness of transparent ceramics can be increased simply by reducing the grain size to 28 nanometers.
Sintering is a common method used to create large ceramic and metal components from powders.
and reposition nanoparticles very close to each other to help eliminate porosity in the sintered ceramic. NRL researchers then can exploit the increased surface potential of nanoparticles for surface energy-driven densification without coarsening.
Using this EHPS approach to create the nanocrystalline spinel the NRL research team did not observe any decline in density or fracture resistance due to residual porosity.
when you make a ceramic material nanocrystalline. However in their work the NRL researchers have shown that the fracture resistance does not change suggesting that nanocrystalline ceramics can have an equivalent toughness to microcrystalline ceramics
which is important for high window lifetimes. The Hall-Petch relationship has been used to describe the phenomenon where a material's strength
However prior experimental work had shown a breakdown in this relationship (where hardness starts reducing with decreasing grain size) for certain ceramics at 130 nanometers.
a member of the Koch Institute and a professor of biological engineering and of materials sciences and engineering, is the paper senior author.
the Warren K. Lewis Professor of Chemical engineering and a professor of materials science and engineering, and Robert Langer, the David H. Koch Institute Professor and a member of the Koch Institute.
#New Technique Increases Nanofiber Production Rate Fourfold Nanofibers polymer filaments only a couple of hundred nanometers in diameter have a huge range of potential applications, from solar cells
In the first, a polymer solution is pumped through a small nozzle, and then a strong electric field stretches it out.
The cones are dipped in a polymer solution, and the electric field causes the solution to travel to the top of the cones,
and a dissolved polymer. When an electrode is mounted opposite the sawteeth and a voltage applied between them,
the water-ethanol mixture streams upward, dragging chains of polymer with it. The water and ethanol quickly dissolve, leaving a tangle of polymer filaments opposite each emitter, on the electrode.
The researchers were able to pack 225 emitters, several millimeters long, on a square chip about 35 millimeters on a side.
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011