Not what we thought they were For the past 10 years scientists have been fascinated by a type of electric bacteria that shoots out long tendrils like electric wires using them to power themselves
and transfer electricity to a variety of solid surfaces. Today a team led by scientists at USC has turned the study of these bacterial nanowires on its head discovering that the key features in question are not pili as previously believed
Understanding the way these electric bacteria work has applications well beyond the lab. Such creatures have the potential to address some of the big questions about the nature of life itself including
and others at the University of Massachusetts Amherst today report a breakthrough technique for controlling molecular assembly of nanoparticles over multiple length scales that should allow faster cheaper more ecologically friendly manufacture of organic photovoltaics and other electronic devices.
Materials chemist Paul Lahti co-director with Thomas Russell of UMASS Amherst's Energy Frontiers Research center (EFRC) supported by the U s. Department of energy says One of the big implications of this work
is that it goes well beyond organic photovoltaics or solar cells where this advance is being applied right now.
Looking at the bigger picture this technique offers a very promising flexible and ecologically friendly new approach to assembling materials to make device structures.
The new method should reduce the time nano manufacturing firms spend in trial-and-error searches for materials to make electronic devices such as solar cells organic transistors and organic light-emitting diodes.
For photovoltaics Venkataraman points out The next thing is to make devices with other polymers coming along to increase power conversion efficiency
He suggests that reaching 5 percent power conversion efficiency would justify the investment for making small flexible solar panels to power devices such as smart phones.
and all 307 million United states users switched from batteries to flexible solar it could save more than 1500 megawatts per year.
That's nearly the output of a nuclear power station Venkataraman says and it's more dramatic
Doctoral student and first author Tim Gehan says that organic solar cells made in this way can be semitransparent as well so you could replace tinted windows in a skyscraper
and have them all producing electricity during the day when it's needed. And processing is much cheaper and cleaner with our cells than in traditional methods.
Scientists develop pioneering new spray-on solar cells More information: Nano Letters pubs. acs. org/doi/pdf/10.1021/nl502209 9
Her team now plans to use the nanorods as seeds themselves to synthesize nanoparticles comprised of a goldopper core surrounded by a shell of another material, such as platinum, for energy applications
and rock music improves the performance of solar cells, in research published with Imperial College London. Developing this research further,
Nokia worked with the QMUL team to create an energy harvesting prototype (a nanogenerator) that could be used to charge a mobile phone using everyday background noise such as traffic,
or stretched creates a voltage by converting energy from motion into electrical energy, in the form of nanorods.
The nanorods can be coated onto various surfaces in different locations making the energy harvesting quite versatile.
or do away with batteries completely by tapping into the stray energy that is all around us is an exciting concept.
and form the basis of countless electronic devices such as memory chips photovoltaic cells logic gates and sensors. An interesting alternative to inorganic TFTS (silicon) is organic TFTS (OTFTS)
#New graphene framework bridges gap between traditional capacitors batteries Researchers at the California Nanosystems Institute (CNSI) at UCLA have set the stage for a watershed in mobile energy storage by using a special graphene material
to significantly boost the energy density of electrochemical capacitors, putting them on a par with lead acid batteries.
The material, called a holey graphene framework, has perforated a three-dimensional structure characterized by tiny holes;
it not only increases energy density (the amount of energy stored and ready for use) but allows electrochemical capacitors to maintain their high power density (the amount of power per unit of mass or volume), according to Xiangfeng Duan,
Compared with traditional batteries, ECS typically have superior power density and cycle lifehe number of complete chargeischarge cycles an energy source can support before it decreases to 80 percent of its original capacity
and is considered"worn out.""But they have had energy density of at least one order of magnitude below batteries. Because the main component of an EC is its electrode material,
which is responsible for the EC's overall performance, recent research has focused on efficient new materials that are able to increase energy density without sacrificing power density or cycle life.
A high-performance EC electrode must have high electrical conductivity, a high ion-accessible surface area, a high ionic transport rate and high electrochemical stability.
Current state-of-the-art ECS generally use porous activated carbon electrodes with energy densities much lower than lead acid batteries to 5 watt hours per kilogram vs. 25 to 35 watt hours per kilogram (5
to 7 watt hours per liter vs 50 to 90 watt hours per liter. In their study, published online August 8 in the journal Nature Communications, the CNSI researchers led by Duan used a highly interconnected 3d holey graphene framework as the electrode material to create an EC with unprecedented performance.
and ions and enabling the highest gravimetric energy densities of 127 watt hours per kilogram and volumetric energy density of 90 watt hours per liter.
Furthermore, the team has shown that a fully packaged EC exhibits unparalleled energy densities of 35 watt hours per kilogram (49 watt hours per liter) bout five to 10 times higher than current commercial supercapacitors and on a par
with acid batteries.""The holey grahene EC bridges the energy density gap between traditional capacitors and batteries, yet with vastly higher power density,"Duan said."
"It creates exciting opportunities for mobile power supplies for many applications from cell phones to electric vehicles. v
#Stronger better solar cells: Graphene research on the cusp of new energy capabilities (Phys. org) There remains a lot to learn on the frontiers of solar power research particularly
when it comes to new advanced materials which could change how we harness energy. Under the guidance of Canada Research Chair in Materials science with Synchrotron radiation Dr. Alexander Moewes University of Saskatchewan researcher Adrian Hunt spent his Phd investigating graphene oxide a cutting-edge material that he hopes will shape the future
of technology. To understand graphene oxide it is best to start with pure graphene which is a single-layer sheet of carbon atoms in a honeycomb lattice that was made first in 2004 by Andre Geim
All of this makes graphene a great candidate for solar cells. In particular its transparency and conductivity mean that it solves two problems of solar cells:
first light needs a good conductor in order to get converted into usable energy; secondly the cell also has to be transparent for light to get through.
Most solar cells on the market use indium tin oxide with a nonconductive glass protective layer to meet their needs.
Indium is extremely rare so it is becoming more expensive all the time. It's the factor that will keep solar cells expensive in the future
whereas graphene could be very cheap. Carbon is said abundant Hunt. Although graphene is a great conductor it is not very good at collecting the electrical current produced inside the solar cell
which is why researchers like Hunt are investigating ways to modify graphene to make it more useful.
Whether or not it will solve the solar panel problem is yet to be seen and researchers in the field are building up their understanding of how the new material works.
It's a pitfall that could be important to understand in the development of long-lasting solar cells where sun could provide risky heat into the equation.
#Used-cigarette butts offer energy storage solution A group of scientists from South korea have converted used-cigarette butts into a high-performing material that could be integrated into computers handheld devices electrical vehicles and wind turbines to store energy.
which simultaneously offers a green solution to meeting the energy demands of society. Numerous countries are developing strict regulations to avoid the trillions of toxic and non-biodegradable used-cigarette filters that are disposed of into the environment each yearur method is just one way of achieving this.
Scientists around the world are currently working towards improving the characteristics of supercapacitorsuch as energy density power density
and tested in a three-electrode system to see how well the material could adsorb electrolyte ions (charge) and then release electrolyte ions (discharge).
The material stored a higher amount of electrical energy than commercially available carbon and also had a higher amount of storage compared to graphene
#New material allows for ultra-thin solar cells Extremely thin, semitransparent, flexible solar cells could soon become reality.
At the Vienna University of Technology, Thomas Mueller, Marco Furchi and Andreas Pospischil have managed to create a semiconductor structure consisting of two ultra-thin layers,
which appears to be suited excellently for photovoltaic energy conversion Several months ago, the team had produced already an ultra-thin layer of the photoactive crystal tungsten diselenide.
creating a designer-material that may be used in future low-cost solar cells. With this advance the researchers hope to establish a new kind of solar cell technology.
Ultra-thin materials, which consist only of one or a few atomic layers are currently a hot topic in materials science today.
"We had already been able to show that tungsten diselenide can be used to turn light into electric energy
But a solar cell made only of tungsten diselenide would require countless tiny metal electrodes tightly spaced only a few micrometers apart.
The heterostructure can now be used to build large-area solar cells. When light shines on a photoactive material single electrons are removed from their original position.
if the energies of the electrons in both layers are tuned exactly the right way. In the experiment, this can be done using electrostatic fields.
Florian Libisch and Professor Joachim Burgdörfer (TU Vienna) provided computer simulations to calculate how the energy of the electrons changes in both materials
and which voltage leads to an optimum yield of electrical power.""One of the greatest challenges was to stack the two materials,
the solar cell will not work.""Eventually, this feat was accomplished by heating both layers in vacuum and stacking it in ambient atmosphere.
and converted into electric energy. The material could be used for glass fronts, letting most of the light in,
but still creating electricity. As it only consists of a few atomic layers, it is extremely light weight (300 square meters weigh only one gram),
but increase the electrical power o
#Surprise discovery could see graphene used to improve health (Phys. org) chance discovery about the'wonder material'graphene already exciting scientists because of its potential uses in electronics,
energy storage and energy generation takes it a step closer to being used in medicine and human health.
Strategic Energy resources Ltd and an expert in polarized light imaging, Dr. Rudolf Oldenbourg from the Marine Biological Laboratory, USA,
CEO of Strategic Energy resources Ltd said the collaboration with Monash was progressing well.""We are pleased so to be associated with Dr Majumder's team at Monash University.
The research was made possible by an ARC Linkage grant awarded to Strategic Energy resources Ltd and Monash University and was the first linkage grant for graphene research in Australia s
#Nanoscale details of electrochemical reactions in electric vehicle battery materials Using a new method to track the electrochemical reactions in a common electric vehicle battery material under operating conditions,
The results, published August 4, 2014, in Nature Communications, could provide guidance to inform battery makers'efforts to optimize materials for faster-charging batteries with higher capacity."
"Our work was focused on developing a method to track structural and electrochemical changes at the nanoscale as the battery material was charging,
or positive electrode, of electrical vehicle batteries-as the battery charged.""We wanted to catch
known as delithiation, is the key to recharging the battery to its fullest capacity so it will be able to provide power for the longest possible period of time.
Understanding the subtle details of why that doesn't always happen could ultimately lead to ways to improve battery performance,
Many previous methods used to analyze such battery materials have produced data that average out effects over the entire electrode.
The scientists used these methods to analyze samples made up of multiple nanoscale particles in a real battery electrode under operating conditions (in operando.
they also conducted the same in operando study using smaller amounts of electrode material than would be found in a typical battery.
The detailed images and spectroscopic information reveal unprecedented insight into why fast charging reduces battery capacity.
and could give industry guidance to help them develop a future fast-charge/high-capacity battery,
"So rather than focusing only on the battery materials'individual features, manufacturers might want to look at ways to prepare the electrode
"These discoveries provide the fundamental basis for the development of improved battery materials, "said Jun Wang."
"In addition, this work demonstrates the unique capability of applying nanoscale imaging and spectroscopic techniques in understanding battery materials with a complex mechanism in real battery operational conditions."
"The paper notes that this in operando approach could be applied in other fields, such as studies of fuel cells and catalysts,
which conducts electricity and can be printed by a standard inkjet printer. The graphene-based ink enables cost-effective printed electronics on plastic.
which can be applied as high performance electrodes for secondary batteries and fuel cells. Yung-Eun Sung is both a group leader at the Center for Nanoparticle Research at Institute for Basic Science*(IBS) and a professor at the Seoul National University.
these materials enhance the performance of secondary batteries and drive down the cost of producing fuel cells.
This process using common laboratory reagent, sodium hydroxide (Naoh) and heteroatom-containing organic solvents as precursors.
In addition, the lithium-ion batteries that had applied modified graphenes to it, exhibited a higher capacity than the theoretical capacity of graphite
which was used previously in lithium-ion batteries. It presented high chemical stability which resulted in no capacity degradation in charge and discharge experiments.
alternative chemical material by demonstrating performance comparable to that of the expensive platinum catalyst used for the cathode of fuel cell batteries.
, florine, boron, phosphorus) which can then increase the method's potential applications in fuel cells lithium secondary batteries, sensors, and semiconductors
#A crystal wedding in the nanocosmos Researchers at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), the Vienna University of Technology and the Maria Curie-Sklodowska University Lublin have succeeded in embedding nearly perfect semiconductor crystals
UC Berkeley professor of mechanical engineering, has found a way to dramatically increase the sensitivity of a light-based plasmon sensor to detect incredibly minute concentrations of explosives.
"The ability to magnify such a small trace of an explosive to create a detectable signal is a major development in plasmon sensor technology,
Unstable and hungry for electrons The nanoscale plasmon sensor used in the lab experiments is much smaller than other explosive detectors on the market.
Because of this, the researchers are hopeful that their plasmon laser sensor could detect pentaerythritol tetranitrate, or PETN, an explosive compound considered a favorite of terrorists.
Latest generation of plasmon sensors The sensor represents the latest milestone in surface plasmon sensor technology,
By coupling electromagnetic waves with surface plasmons the oscillating electrons found at the surface of metals,
but sustaining the confined energy was challenging because light tends to dissipate at a metal's surface.
The new device builds upon earlier work in plasmon lasers by Zhang's lab that compensated for this light leakage by using reflectors to bounce the surface plasmons back and forth inside the sensor similar to the way sound waves are reflected across the room
Zhang said the amplified sensor creates a much stronger signal than the passive plasmon sensors currently available
"The difference in intensity is similar to going from a light bulb for a table lamp to a laser pointer,
and re-emitted into another energy level that differs from their initial level. By measuring and analyzing these re-emitted photons through Raman spectroscopy,
"Halas, the Stanley C. Moore Professor in Electrical and Computer engineering and a professor of biomedical engineering, chemistry, physics and astronomy at Rice, said the potential applications for SECARS include chemical and biological sensing as well as metamaterials research.
using a simple SEM operating at only a fraction of the electron energies of previous work,
#Sand-based lithium ion batteries that outperform standard by three times (Phys. org) esearchers at the University of California, Riverside's Bourns College of Engineering have created a lithium ion battery that outperforms the current industry standard by three times.
environmentally friendly way to produce high performance lithium ion battery anodes,"said Zachary Favors, a graduate student working with Cengiz and Mihri Ozkan, both engineering professors at UC Riverside.
His research is centered on building better lithium ion batteries, primarily for personal electronics and electric vehicles. He is focused on the anode
or negative side of the battery. Graphite is the current standard material for the anode,
That porosity has proved to be the key to improving the performance of the batteries built with the nano-silicon l
QSI plans to demonstrate the potential of these"extremely green"circuits that can make use of smaller, longer-lasting batteries.
During the 1990s'researchers found that plasmons, tiny waves of electrons in metallic surfaces that appear
the plasmons in the nanoparticles enhance the Raman signal coming from the molecules that have to be detected with several orders of magnitude.
One possibility is to use hybrid solar cells that combine silicon nanowires with low-cost, photoresponsive polymers. The high surface area and confined nature of nanowires allows them to trap significant amounts of light for solar cell operations.
Unfortunately, these thin, needle-like structures are very fragile and tend to stick together when the wires become too long.
One significant problem, notes Wang, is control of the initial stages of nanohole formation crucial period that can often induce defects into the solar cell.
The team analyzed the solar cell activity of their nanohole interfaces by coating them with a semiconducting polymer and metal electrodes.
which impede the solar cell industry, "says Wang.""In addition, this approach can be transferred easily to silicon thin films to develop thin-film siliconolymer hybrid solar cells with even higher efficiency. e
#Making dreams come true: Making graphene from plastic? Graphene is gaining heated attention dubbed a wonder material with great conductivity flexibility and durability.
The newly developed material can be used as a substitute for graphene in solar cells and semiconductor chips.
and directly used the transparent electrodes for organic solar cells. The research outcome was introduced in Nanoscale a journal of Royal Society of Chemistry in the UK under the title of One-step Synthesis of Carbon Nanosheets Converted from a Polycylic Compound
and Their Direct Use as Transparent Electrodes of ITO-free Organic solar cells and was selected as a cover story in the January 21st edition in recognition for this innovative and superb research findings.
and move the manufactured graphene to another board such as a solar cell substrate. In this process the quality quickly degrades as it is prone to wrinkles or cracks.
In addition the new method can be used directly as solar cell without any additional process. The research team synthesized a polymer with a rigid ladder structure namely PIM-1 (Polymer of intrinsic microporosity-1) to form the#through the simpole process
"One application the group is now exploring is a thin film solar cell, made of densely packed nanowires,
that could harvest energy from light much more efficiently than traditional thin-film solar cells s
#Chemists seek state-of-the-art lithium-sulfur batteries When can we expect to drive the length of Germany in an electric car without having to top up the battery?
Chemists at the NIM Cluster at LMU and at the University of Waterloo in Ontario, Canada, have synthesized now a new material that could show the way forward to state-of-the-art lithium-sulfur batteries.
Whether or not the future of automotive traffic belongs to the softly purring electric car depends largely on the development of its batteries.
The industry is currently placing most of its hopes in lithium-sulfur batteries, which have a very high storage capacity.
the lithium-sulfur battery still presents several major challenges that need to be resolved until it can be integrated into cars.
For example, both the rate and the number of possible charge-discharge cycles need to be increased before the lithium-sulfur battery can become a realistic alternative to lithium-ion batteries.
Lots of pores for sulfur The chemists Professor Thomas Bein (LMU), Coordinator of the Energy conversion Division of the Nanosystems Initiative Munich, Professor Linda Nazar (University of Waterloo, Waterloo Institute
And the rates of the key reactions at the sulfur electrode-electrolyte interface, which involve both electrons
and storage of electrical energy,"says Thomas Bein.""We in the NIM Cluster will continue to collaborate closely with our colleagues in the Bavarian Soltech Network
"It also would produce transparent electrodes for solar cells and organic light-emitting diodes, Clem said. The method was inspired by industrial embossing processes in
able to transmit light and electricity with specific characteristics. This pressure-regulated fine-tuning of particle separation enables controlled investigation of distance-dependent optical and electrical phenomena.
This interaction enables the energy transfer between the internalized molecules says Raymo director of the UM laboratory for molecular photonics.
If the complementary energy donors and acceptors are loaded separately and sequentially the transfer of energy between them occurs exclusively within the intracellular space he says.
As the energy transfer takes place the acceptors emit a fluorescent signal that can be observed with a microscope.
Essential to this mechanism are the noncovalent bonds that loosely hold the supramolecular constructs together.
The next phase of this investigation involves demonstrating that this method can be used to do chemical reactions inside cells instead of energy transfers.
and construction of smart nanochannels and applied the nanochannels in energy conversion systems. The author thought the inner surface property was the base for confined transportation.
such as cellular signal transfer, energy conversion, potential adjusting, matter exchange and systemic function adjusting. One remarkable example is the electric eel,
Importantly, they have applied the abiotic analogs to energy conversion systems. The confined water, that is water confined in micro-or mesopores,
biological ion channels played key roles for high efficient energy conversion in organisms due to its nanoscale effect and ion selectivity.
which ensures its energy conversion efficiency far beyond the traditional manual energy device. Therefore, inspired by living systems,
which can greatly enhance the conversion efficiency helping us to solve the global energy shortage e
#Bacterial nanometric amorphous Fe-based oxide as lithium-ion battery anode material Leptothrix ochracea is a species of iron-oxidizing bacteria that exists in natural hydrospheres where groundwater outwells worldwide.
but Jun Takada and colleagues at Okayama University discovered unexpected industrial functions of L-BIOX such as a great potential as an anode material in lithium-ion battery.
Since use of the battery that is a powerful electric source for portable electric devices has expanded to a variety of new areas such as transportation
and electric power storage improvement of battery capability and effort to develop new electrode materials have been demanded.
The general processes of nanosizing and appropriate surface modification which are required for tuning the battery property are complicated
Takada and colleagues proposed a unique approach to develop new electrode materials for Li-ion battery.
A Potential Lithium-Ion Battery Anode Material. Hideki Hashimoto Genki Kobayashi Ryo Sakuma Tatsuo Fujii Naoaki Hayashi Tomoko Suzuki Ryoji Kanno Mikio Takano and Jun Takada.
whose lab created the study's crystalline magnetic carbon nanoparticle using an electric plasma discharge inside a toulene solution.
which is used commonly in the semiconductor industry to help route electricity. They observed the metal atoms becoming charged ions, clustering with up to thousands of others into metal nanoparticles,
stays put after the electrical power is turned off in the device. So when researchers turn the power back on
which could make it a much lighter weight replacement for copper transmission lines. The researchers believe that the material lends itself to many kinds of highly sensitive sensors.
such as in batteries for portable devices, where reduced weight is also highly desirable. Another property of these materials is that they conduct sound and elastic waves very uniformly,
meaning they could lead to new acoustic metamaterials, Fang says, that could help control how waves bend over a curved surface.
#New approach may be key to quantum dot solar cells with real gains in efficiency (Phys. org) Los alamos researchers have demonstrated an almost fourfold boost of the carrier multiplication yield with nanoengineered quantum dots.
Quantum dots are novel nanostructures that can become the basis of the next generation of solar cells capable of squeezing additional electricity out of the extra energy of blue and ultraviolet photons.
Typical solar cells absorb a wide portion of the solar spectrum but because of the rapid cooling of energetic (or'hot')charge carriers the extra energy of blue and ultraviolet solar photons is wasted in producing heat said Victor Klimov director of the Center for Advanced Solar Photophysics
(CASP) at Los alamos National Laboratory. In principle this lost energy can be recovered by converting it into additional photocurrent via carrier multiplication.
In that case collision of a hot carrier with a valence-band electron excites it across the energy gap Klimov said.
In this way absorption of a single photon from the high-energy end of the solar spectrum produces not just one
Carrier multiplication is inefficient in the bulk solids used in ordinary solar cells but is enhanced appreciably in ultrasmall semiconductor particles also called quantum dots as was demonstrated first by LANL researchers in 2004 (Schaller & Klimov Phys.
Klimov explained This strong enhancement is derived primarily from the unusually slow phonon relaxation of hot holes that become trapped in high-energy states within the thick Cdse shell.
Applied together these strategies might provide a practical route to nanostructures exhibiting carrier multiplication performance approaching the limits imposed by energy conservation n
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011