Prototype to productglass first conceived of the BAT while working at MIT toward his master s degree in aeronautics and astronautics.
#Getting more electricity out of solar cells When sunlight shines on today solar cells, much of the incoming energy is given off as waste heat rather than electrical current.
In most photovoltaic (PV) materials, a photon (a packet of sunlight) delivers energy that excites a molecule,
which makes up almost half the sun electromagnetic radiation at the Earth surface. According to their estimates, applying their technology as an inexpensive coating on silicon solar cells could increase efficiency by as much as 25 percent.
and pilot their technology in outdoor solar systems. Unified Solar now becomes the finalist in the energy category in the MIT $100k Entrepreneurship Competition,
Sun exposure to solar panels produces about 0. 5 percent of wasted heat per Degree celsius increase.
and to convert carbon dioxide to fuels for applications On earth and in space. Today industrial infrastructure manages basic resources linearly
for the agricultural industry. arth as a spaceshipecovolt is valuable today as a solution to Earth water issues.
But the core technology began as a bit of aerospace ingenuity and has since found its way back to space.
Meeting at MIT in 2006 over a shared fondness for biotech, Silver, then a research scientist in MIT Space Systems Lab,
and Buck, a biological engineering graduate student, won a grant from the NASA Institute for Advanced Concepts program to create a life-support system that could treat waste
and generate electricity for astronauts. Soon, they came across exoelectrogens; a 1999 study had revealed that exoelectrogens could,
in fact, generate more amps per square centimeter than was thought previously. This made exoelectrogens a third and largely better candidate for wastewater treatment, over aerobic or anaerobic methods.
In 2012, NASA began funding a Cambrian project, called Exogen, that uses electromethanogenesis to more efficiently extract oxygen or fuel from CO2 for long-duration space flights.
NASA currently carries out oxygen recovery from CO2 in a multistep chemical process; Exogen will make it a simplified, one-step process.
Surprisingly, shifting from aerospace to Earth applications, and back again, has been an easy transition, Silver says. he challenge of supporting astronauts in space is very similar to sustainability On earth,
he says. hat youe looking to do in space is maximize reuse, while minimizing energetics. If we look at Earth as the spaceship, it the same problem.
With Ecovolt, and its other ongoing projects, Cambrian overall aim, Silver says, is to leverage biotechnology to advance a sustainable ndustrial ecology,
where the waste of industry is recycled to create energy and value much like in natural ecosystems. n a natural ecosystem,
but the company is also planning to launch additional bionic products into the space to provide assistance to a larger number of people Herr says.
David Lidzey a professor of physics and astronomy at the University of Sheffield who was involved not in this work calls the research a really impressive demonstration of a direct measurement of the diffusion of triplet excitons and their eventual trapping.
The problem with solar power is that sometimes the sun doesn shine. Now a team at MIT and Harvard university has come up with an ingenious workaround a material that can absorb the sun heat
and store that energy in chemical form, ready to be released again on demand. This solution is no solar-energy panacea:
since it makes the sun energy, in the form of heat, storable and distributable, says Jeffrey Grossman, an associate professor of materials science and engineering,
Exposing them to sunlight causes them to absorb energy and jump from one configuration to the other,
taking in energy from the sun, storing it indefinitely, and then releasing it on demand.
while the sun isn out, being able to store heat for later use could be a big benefit.
and can withstand extreme temperatures, sun exposure, and heavy wear, says Doyle, the senior author of a paper describing the particles in the April 13 issue of Nature Materials.
known as are earth upconverting nanocrystals. These crystals are doped with elements such as ytterbium, gadolinium, erbium, and thulium,
This new approach could ultimately lead to advances in solar photovoltaics, detectors for telescopes and microscopes,
The findings could also prove useful in optical systems, such as microscopes and telescopes, for viewing faint objects that are close to brighter objects for example, a faint planet next to a bright star.
By using a system that receives light only from a certain angle, such devices could have improved an ability to detect faint targets.
Plants typically make use of only about 10 percent of the sunlight available to them,
Howard A. Stone a professor of mechanical and aerospace engineering at Princeton university who was involved not in this research calls this a very interesting paper
Pantazis says. e now have the tools to precisely map brain function both in space and time,
and it works much more reliably than lidar in bright sunlight when ambient light can yield misleading readings.
#Inexpensive nano-camera can operate at the speed of light A $500 ano-camerathat can operate at the speed of light has been developed by researchers in the MIT Media Lab. The three-dimensional camera,
Since the speed of light is known, it is then simple for the camera to calculate the distance the signal has travelled
These loops form a new layer surrounding the nanotube, known as a corona. The MIT researchers found that the loops within the corona are arranged very precisely along the tube,
and the spacing between the anchors determines which target molecule will be able to wedge into the loops
They are now working on a way to predict such polymer-nanotube interactions based on the structure of the corona layers,
using data generated from a new type of microscope that Landry built to image the interactions between the carbon nanotube coronas
and their targets. hat happening to the polymer and the corona phase has been a bit of a mystery,
Howard Stone, a professor of mechanical and aerospace engineering at Princeton university who was involved not in this work,
It might be a job for efficient spray cooling f we can figure out how to fit a system into the small space inside electronic devices.
a professor of mechanical, aerospace, and nuclear engineering at Rensselaer Polytechnic institute who was involved not in this research,
Don Boroson on NASA s record-breaking use of laser communications Last week NASA announced that the Lunar Laser communication Demonstration (LLCD) on its Lunar Atmosphere
and Dust environment Explorer (LADEE) spacecraft had made history by using a pulsed laser beam to transmit data over the 239000 miles from the moon to Earth at a record-breaking data-download speed of 622 megabits per second (Mbps). This download speed is more than six times faster than the speed achieved by the best
radio system ever flown to the moon. LLCD also demonstrated a data-upload speed of 20 Mbps on a laser beam transmitted from a ground station in New mexico to the LADEE spacecraft in lunar orbit;
this speed is 5000 times faster than the upload speed of the best radio system sent to the moon.
Finally LLCD provided continuous measurements of the distance from Earth to the fast-moving LADEE spacecraft with an unprecedented accuracy of less than half an inch.
These tests were the first in a monthlong demonstration of the capabilities of the LLCD
He describes below the highly improved communications capabilities that will enable NASA to significantly change the scope and design of future scientific space missions.
It is NASA s first space-based laser communications system. And it is by far the longest two-way laser communications link ever accomplished.
The beam-stabilization system on the space terminal is based on inertial sensors which can be scaled to work even at the most distant planets.
And the ground receiver is based on arrays of small inexpensive telescopes that are coupled fiber to highly efficient superconducting nanowires a photon counting technology that was brought to its high state of maturity by joint MIT and Lincoln Lab teams.
Q: Why is this work important? A: It is agreed generally that present-day science and exploration missions to deep space are constrained by the amount of data they can get back to Earth.
Mars landers and orbiters gather much more information in the form of images for example than they can send back over the huge distance Mars is as much as 1000 times farther from Earth than the moon despite the incredible development of NASA s radio-based
Deep space Network over the past 50 years. It has been known for years that laser communications have the potential to deliver much higher data rates and use smaller space terminals than radio-based systems.
But it has been an elusive goal to bring laser communications techniques and systems to the point where they can actually deliver on their promises.
With the success of LLCD next-generation space mission designers can now feel more comfortable in including a laser communication system as part of their design.
and power on their spacecraft for the much higher data return they can get. Q:
and concepts that Lincoln Laboratory has been developing for NASA for the past 10 years and those grew out of our laser communications developments from the previous 20 years.
When Lincoln Lab pointed out to the NASA sponsors that the pieces could add up to this demonstration NASA made the mission happen.
Then the Laboratory did the more detailed full-system design the detailed design of the three modules that make up the space terminal and the detailed design of the primary ground terminal.
and delivered these various parts to the spacecraft and to the ground site. Finally we designed
and configuring the space and ground segments in a coordinated fashion h
#Persuading light to mix it up with matter Researchers at MIT have succeeded in producing and measuring a coupling of photons
which is periodic both in time and space. Victor Galitski, a professor of physics at the University of Maryland who was involved not in this research,
the Sun Jae Professor of Mechanical engineering at MIT. hat pretty much a description of what the ankle is.
when in audio recordings represents every second of speech as a point in a three-dimensional space.
Video courtesy of Stephen Shum E pluribus tresthe result is that for every second of a recording a diarization system would have to search a space with 120000 dimensions which would be prohibitively time-consuming.
The graph would be a diagonal line in a two-dimensional space. Now imagine rotating the axes of the graph
Similarly i-vectors find new axes for describing the information that characterizes speech sounds in the 120000-dimension space.
Birds of a featherfor every second of sound in a recording Shum thus ends up with a single point in a three-dimensional space.
and the spherical representation fits naturally with the 3-D space. It s just kind of a recoding of the features that has more natural properties.
and receive light over a very confined space, Fang says, and could lead to nique optical material that has great potential for optical interconnects.
the switches in the inductor path are flipped. n this technology space, there usually a trend to lower efficiency as the power gets lower,
or exercise-monitoring space. So an alternative is to go to a combination of a battery and a capacitor,
but spreads out to fill a confined space as a gas does. Add oil to supercritical water (SCW) and stir,
and astronomy whose lab led the research. The magnetic graphene acquires new electronic properties so that new quantum phenomena can arise.
First the cell absorbs sunlight which excites electrons in the active layer of the cell.
The collaborating group from Rensselaer Polytechnic institute is led by Diana Borca-Tasciuc, associate professor of mechanical, aerospace and nuclear engineering.
This shows that we can use 3-D printing to create complex electronics including semiconductors said Mcalpine an assistant professor of mechanical and aerospace engineering.
and biological materials said Kong a graduate student in mechanical and aerospace engineering. Kong the lead author of the Oct 31 article describing the current work in the journal Nano Letters said that the contact lens project on the other hand involved the printing of active electronics using diverse materials.
Hyoungsoo Kim a postdoctoral research associate and fluid dynamics expert in the mechanical and aerospace engineering department;
Dan Steingart an assistant professor of mechanical and aerospace engineering and the Andlinger Center helped design and build the new printer
Our approach reduces the cost of nanolithography to the point where it could be done in your garage says Dr. Chih-Hao Chang an assistant professor of mechanical and aerospace engineering at NC State and senior author of a paper on the work.
When you try to fit the larger boxes into the space for a smaller box it creates an immense strain said Argonne physicist Byeongdu Lee.
because the pressure removes all the space between them. This benzene then becomes highly reactive so that when we release the pressure very slowly an orderly polymerization reaction happens that forms the diamond-core nanothread.
One of our wildest dreams for the nanomaterials we are developing is that they could be used to make the super-strong lightweight cables that would make possible the construction of a space elevator
These spaces are very important for this architecture said Purdue postdoctoral research associate Vinodkumar Etacheri.
#Toward a low-cost'artificial leaf'that produces clean hydrogen fuel For years scientists have been pursuing artificial leaf technology a green approach to making hydrogen fuel that copies plants'ability to convert sunlight into a form of energy they can use.
Peidong Yang Bin Liu and colleagues note that harnessing sunlight to split water and harvest hydrogen is one of the most intriguing ways to achieve clean energy.
Producing hydrogen at low cost from water using the clean energy from the sun would make this form of energy
and exposed to sunlight produces hydrogen gas. The scientists say that the technique could allow their technology to be scaled up at low cost.
With this system we can track the self-assembly of the nanoparticles according to the space accessible to them.
For example it would take the lifetime of the universe for hydrogen the smallest of all atoms to pierce a graphene monolayer.
These metals open the application space to areas such as energy harvesting sensing and electrochemical studies. The lift off technique is a method of patterning target materials on the surface of a substrate by using a sacrificial material.
The researchers led by Professor Joel K. W. Yang at A*STAR (the Agency for Science Technology
To demonstrate how these nanopixels could enable high-resolution 3d color microprints the researchers designed a stereoscopic image containing stars on a 2d sheet by overlaying two slightly displaced views of the same image onto the same area.
The other four peaks include Sustainable Earth New Media the East-West knowledge hub and Innovation Asia.
Last spring Fan received a proof-of-concept grant from the Department of energy through the North Central Regional Sun Grant Center to determine
Sun Grant promotes collaboration among researchers from land-grant institutions government agencies and the private sector to develop
#New nanocomposites for aerospace and automotive industries The Center for Research in Advanced Materials (CIMAV) has developed reinforced graphite nanoplatelets seeking to improve the performance of solar cell materials.
this allows us to move into the automotive construction aerospace textile and electronics sectors which are demanding
While they are not nearly as efficient as silicon-based solar cells in collecting sunlight and transforming it into electricity,
The new dye-sensitized solar cells were as much as 20 percent better at converting sunlight into power,
because it slightly enlarges the interlayer space between MXENE flakes allowing ions to penetrate deep into the electrode;
These characteristics mark the trail heads of a variety of paths for research on this nanocomposite material for applications from flexible armor to aerospace components.
#Microtubes create cozy space for neurons to grow and grow fast Tiny, thin microtubes could provide a scaffold for neuron cultures to grow
"These are exactly the types of spaces where they grow in vivo. What was really surprising was how much faster they grew.
Coauthor Eleanor Gillette's modeling shows that the unique design of the nanopore battery is responsible for its success. The space inside the holes is so small that the space they take up all added together would be no more than a grain of sand.
To control their micro-swimmers the researchers integrated tiny rare-earth magnets in the two scallop shells.
These spaces between transistors have been much more challenging and extremely expensive to miniaturize an obstacle that limits the future development of computers.
and reduce carbon dioxide emissions on the earth Shimoi said d
#Physicists set new records for silicon quantum computing Two research teams working in the same laboratories at UNSW Australia have found distinct solutions to a critical challenge that has held back the realisation of super
Over the years scientists have been very successful at making complex 3d shapes from DNA using diverse strategies said Wei Sun a postdoctoral scholar in the Wyss'Molecular Systems Lab
and functionally-relevant materials such as gold and silver Sun said. Just as any expanding material can be shaped inside a mold to take on a defined 3d form the Wyss team set out to grow inorganic particles within the confined hollow spaces of stiff DNA nanostructuresthe concept can be likened to the Japanese method of growing watermelons in glass cubes.
By nurturing watermelon seeds to maturity inside cube-shaped glass boxes Japanese farmers create cube-shaped mature melons that allow for densely-packed shipping and storage of the fruit.
and expanded to fill all existing space within the DNA framework resulting in a cuboid nanoparticle with the same dimensions as its mold. with the length width
from the School of Physics and Astronomy at the University of Leeds and a co-author of the paper.
a Phd student from the School of Physics and Astronomy at the University of Leeds and the lead author of the research paper.
Professor Evans and his team have all of the membrane proteins required to construct a fully working mimic of the way plants capture sunlight.
This has become possible by employing a remarkable physical effect the spin-orbit coupling of light.
"A particle in free space will always emit as much light into one particular direction as it emits into the opposite direction,
The effect is called"spin-orbit-coupling of light"."Coupling Rotation and the Direction of Motion
A group of researchers from the Institute of Bioengineering and Nanotechnology (IBN) of A*STAR has taken the health benefits of green tea to the next level by using one of its ingredients to develop a drug delivery system
or propulsion systems for fist-sized nanosatellites. In the latest issue of the IEEE Journal of Microelectromechanical systems Velsquez-Garca his graduate students Eric Heubel and Philip Ponce de Leon and Frances Hill a postdoc in his group describe a new prototype
Higher currents thus promise more-efficient manufacturing and more-nimble satellites. The same prototype also crams 1900 emitters onto a chip that's only a centimeter square quadrupling the array size and emitter density of even the best of its predecessors.
and not a beam of droplets says Herbert Shea an associate professor in the Microsystems for Space technologies Laboratory at the cole Polytechnique Fdrale de Lausanne.
Shea believes that at least in the near term the technology's most promising application is in spacecraft propulsion.
whereas it would take very little effort to use it as propulsion for small spacecraft he says.
The reason you'd like to be in ion mode is to have the most efficient conversion of the mass of the propellant into the momentum of the spacecraft t
It should absorb virtually all wavelengths of light that reach Earth's surface from the sun but not much of the rest of the spectrum since that would increase the energy that is reradiated by the material
and has the additional benefits of absorbing sunlight from a wide range of angles and withstanding extremely high temperatures.
The sunlight's energy is converted first to heat which then causes the material to glow emitting light that can in turn be converted to an electric current.
In order to take maximum advantage of systems that concentrate sunlight using mirrors the material must be capable of surviving unscathed under very high temperatures Chou says.
And since the new material can absorb sunlight efficiently from a wide range of angles Chou says we don't need really solar trackers
In this paper the authors demonstrated in a system designed to withstand high temperatures the engineering of the optical properties of a potential solar thermophotovoltaic absorber to match the sun's spectrum.
HFML researcher Peter Christianen stated'Our chemist colleagues published an article recently about a type of nano rockets#vesicles
if we could steer these rockets with magnetic fields but to our surprise the vesicles opened during those experiments.
Now researchers at A*STAR have used a process known as friction stir processing (see image) to produce an evenly distributed mix of nanosized aluminum oxide (Al2o3) particles in aluminum.
and has exciting potential for the car space and defense industries. Current powder metallurgy or liquid processing methods fail to achieve uniform processing says research leader Junfeng Guo who is from the A*STAR Singapore Institute of Manufacturing Technology.
Guo J. F. Liu J. Sun C. N. Maleksaeedi S. Bi G. et al. Effects of nano-Al2o3 particle addition on grain structure evolution and mechanical behaviour of friction-stir-processed Al.
#Experts create unique nanoparticles for aerospace industry A development of three universities enables improved thermal and electronic properties on devices with nickel-titanium alloys.
Experts collaborated to produce nanoparticles made of a titanium-nickel alloy used in the development of thermal and electrical sensors that control the operation of high-tech devices such as those used in aerospace,
Hydrogen is virtually everywhere on the planet, but the element is bonded typically with other elements
Researchers have known long that some single-celled organisms use a protein called bacteriorhodopsin (br) to absorb sunlight
If the researchers wanted to power their generators with sunlight, they'd need to improve on that.
Aligned CNTS were intercalated firstly into the interlayer spaces of the layered catalyst embedded with metal nanoparticles (NPS) through a low-temperature (L-T) CVD
and light along the same tiny wire a finding that could be a step towards building computer chips capable of transporting digital information at the speed of light.
acts as a large solar system that can be used to recharge portable electronics and lights for the upcoming night of camping."
calibrated to one Sun illumination (natural sunlight). The measurement itself is conceptually simple:""We're applying an oscillating voltage across the device
"We do this underneath the simulated sunlight. Mathematically, we're looking at the phase shifting of the current out relative to the voltage in."
"Co-authors are Xiaoping Hong, Jonghwan Kim, Su-Fei Shi, Yu Zhang, Chenhao Jin, Yinghui Sun, Sefaattin Tongay, Junqiao Wu and Yanfeng Zhang.
which degrade under exposure to sunlight and can also be difficult to align with imaging sensors.
or reflect it back into free space. The metallic nanostructures use surface plasmons waves of electrons that flow like a fluid across metal surfaces.
what types of lifeforms we might find in extreme environments like space. In addition this research has the potential to inform the creation of living microbial circuits forming the foundation of hybrid biological-synthetic electronic devices.
It's a pitfall that could be important to understand in the development of long-lasting solar cells where sun could provide risky heat into the equation.
on the one hand, electronic components must be accommodated into smaller and smaller spaces. On the other hand, what are known as compound semiconductors are to be embedded into conventional materials.
researchers were able to squeeze light into nanosized spaces, but sustaining the confined energy was challenging
"Halas, the Stanley C. Moore Professor in Electrical and Computer engineering and a professor of biomedical engineering, chemistry, physics and astronomy at Rice, said the potential applications for SECARS include chemical and biological sensing as well as metamaterials research.
This along with poor adhesion prevented their application to critical space and airborne instrumentation. The two year development and test program was completed in December 2013 during
As part of the program qualification to European Cooperation on Space Standardization (ECSS) standards was achieved also.
Stephen Westland professor of color science and technology at Leeds University said in The Independent These new materials they are pretty much as black as we can get almost as close to a black hole as we could imagine.
One example of a use for the material is in telescopes to increase the instruments'ability to see very faint stars.
For example it reduces stray-light improving the ability of sensitive telescopes to see the faintest stars
and allows the use of smaller lighter sources in space-borne black body calibration systems.
Its ultra-low reflectance improves the sensitivity of terrestrial space and airborne instrumentation. The company listed other special characteristics:
How much of the universe is black holes? More information: www. surreynanosystems. com/news/19 9
#Researchers demonstrate novel tunable nanoantennas A research team from the University of Illinois at Urbana-Champaign has developed a novel,
or satellites, like replacing one link in a chain given the time-intensiveness of making the new circuits.
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011