| Chip (132) |  |
| Circuit board (4) | |
| Electric circuit (4) | |
| Electronic circuit (5) | |
| Integrated circuit (8) | |
| Chip (132) | |
| Circuit board (4) | |
| Electric circuit (4) | |
| Electronic circuit (5) | |
| Integrated circuit (8) | |
They accomplished this by building in a tiny chip-scale commercially available battery into the device.
For a new study researchers used used iron-enhanced carbon cooked from hickory chips to successfully remove the toxin.
As reported in the journal Water Research Gao ground wood chips that were heated then in nitrogen gas but not burned.
For a new study researchers used used iron-enhanced carbon cooked from hickory chips to successfully remove the toxin.
As reported in the journal Water Research Gao ground wood chips that were heated then in nitrogen gas but not burned.
The new chip which is a hundred times more sensitive than current devices is fitted with wires that can be hooked up to a card for wireless data transmission
Chips may be left in place for years though they may break in freezing temperatures. Such inexpensive and accurate sensors can be spaced strategically in plants
While growers can use the sensors to monitor water in soils for their crops civil engineers can embed the chips in concrete to determine optimal moisture levels as the concrete cures. ne of our goals is to try
The sensors make use of microfluidic technologyâ##developed by Abraham Stroock associate professor of chemical and biomolecular engineeringâ##that places a tiny cavity inside the chip.
and then the chip may be inserted in a plant stem or in the soil where it through a nanoporous membrane exchanges moisture with its environment and maintains an equilibrium pressure that the chip measures.
Using chips embedded in plants or spaced across soil and linked wirelessly to computers allows growers toâ ontrol the precise moisture of blocks of land based on target goalssays Vinay Pagay who helped develop the chip as a doctoral student in Lakso s
lab. The Cornell Center for Technology Enterprise and Commercialization is handling the intellectual property rights and patents.
Source: Cornell Universityyou are free to share this article under the Creative Commons Attribution-Noderivs 3. 0 Unported license
For decades progress in electronics has meant shrinking the size of each transistor to pack more transistors on a chip.
leader in chip research. He called the Stanford work major benchmarkin moving CNTS toward practical use.
But with billions of nanotubes on a chip even a tiny degree of misaligned tubes could cause errors
and director of SONIC a consortium of next-generation chip design research. he Wong/Mitra paper demonstrates the promise of CNTS in designing complex computing systemsshanbhag says adding that this will motivate researchers elsewhere toward greater efforts in chip design
from the filament in a light bulb to the silicon in a computer chip. Whether we 3d print them
But Eta Devices has developed a chip (for smartphones) and a shoebox-size module (for base stations) based on nearly a decade of MIT research to essentially switch gears to adjust voltage supply to power amplifiers as needed cutting the waste.
Eta Devices has entered also conversations with major manufacturers of LTE-enabled smartphones to incorporate their chips by the end of next year.
this new chip can do both, and it can power the device directly from the battery.
All of those operations also share a single inductor the chip main electrical component which saves on circuit board space
the chip power consumption remains low. e still want to have battery-charging capability, and we still want to provide a regulated output voltage,
To control the current flow across their chip, El-Damak and her advisor, Anantha Chandrakasan,
whose regulation is the very purpose of the chip. Since that voltage is fixed, the variation in timing has to come from variation in capacitance.
El-Damak and Chandrakasan thus equip their chip with a bank of capacitors of different sizes.
who leads a power conversion development project as a fellow at the chip manufacturer Maxim Integrated. f youe only coming in with a small amount,
he adds. t really kind of a full system-on-a chip for power management. And that makes it a little more complicated
At the heart of any digital camera is an image sensor, a chip with millions of pixels.
our sensor architecture easily lends itself to a compact solid-state imaging chip. We believe our results are a significant step forward in developing an entirely new generation of cameras that can function for a very long durationdeally,
and the study principal investigator. ut this new technology is very similar to the one used to print semiconductor chips onto silicon wafers,
#Tunnel Transistor May Meet Power Needs of Future Chips A new kind of transistor consumes 90 percent less power than conventional transistors,
What makes this printer so efficient is its digital micromirroring array device chip (DMD), containing millions of micromirrors that function separately from one another to cast the desired microfish design onto photosensitive material,
Regulations require collaboration to ensure safety September 14th, 2015an even more versatile optical chip: An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th,
2015flexible Electronics SLAC's ultrafast'electron camera'visualizes ripples in 2-D material: Understanding motions of thin layers may help design solar cells, electronics and catalysts of the future September 10th, 2015realizing carbon nanotube integrated circuits:
Rice university researchers model graphene/nanotube hybrids to test properties September 14th, 2015an even more versatile optical chip:
An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th,
Rice university researchers model graphene/nanotube hybrids to test properties September 14th, 2015an even more versatile optical chip:
An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th,
Regulations require collaboration to ensure safety September 14th, 2015an even more versatile optical chip: An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th, 2015interviews/Book reviews/Essays/Reports/Podcasts/Journals/White papers Pillared graphene gains strength:
Rice university researchers model graphene/nanotube hybrids to test properties September 14th, 2015coming out September 14th, 2015nano in food and agriculture:
Rice university researchers model graphene/nanotube hybrids to test properties September 14th, 2015an even more versatile optical chip:
An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th,
Rice university researchers model graphene/nanotube hybrids to test properties September 14th, 2015an even more versatile optical chip:
An INRS team is generating photon pairs with complex quantum states on a chip compatible with electronic systems September 14th,
"But this new technology is very similar to the one used to print semiconductor chips onto silicon wafers,
and the study principal investigator. ut this new technology is very similar to the one used to print semiconductor chips onto silicon wafers,
and is an inexpensive lab on a chip. Drawing of blood components being separated by sound waves.
and biological research. ecause the device is built on a lab-on-a chip system, it is both compact and inexpensive about the size and cost of a cell phone in its current configuration.
Lung and Blood Institute of the National institutes of health, published their work in a recent issue of Lab on a Chip. ell sorting is used widely in many areas of biology to characterize
this new chip can do both, and it can power the device directly from the battery.
All of those operations also share a single inductor the chip main electrical component which saves on circuit board space
Nonetheless, the chip power consumption remains low. e still want to have battery-charging capability, and we still want to provide a regulated output voltage,
To control the current flow across their chip, El-Damak and her advisor, Anantha Chandrakasan,
whose regulation is the very purpose of the chip. Since that voltage is fixed, the variation in timing has to come from variation in capacitance.
El-Damak and Chandrakasan thus equip their chip with a bank of capacitors of different sizes.
who leads a power conversion development project as a fellow at the chip manufacturer Maxim Integrated. f youe only coming in with a small amount,
he adds. t really kind of a full system-on-a chip for power management. And that makes it a little more complicated
#New MIT Power Converter Chip Harvests More than 80%of Energy Realizing that vision, however, will require extremely low-power sensors that can run for months without battery changes or, even better,
this new chip can do both, and it can power the device directly from the battery.
All of those operations also share a single inductor the chip main electrical component which saves on circuit board space
Nonetheless, the chip power consumption remains low. e still want to have battery-charging capability, and we still want to provide a regulated output voltage,
To control the current flow across their chip, El-Damak and her advisor, Anantha Chandrakasan,
whose regulation is the very purpose of the chip. Since that voltage is fixed, the variation in timing has to come from variation in capacitance.
El-Damak and Chandrakasan thus equip their chip with a bank of capacitors of different sizes.
who leads a power conversion development project as a fellow at the chip manufacturer Maxim Integrated. f youe only coming in with a small amount,
he adds. t really kind of a full system-on-a chip for power management. And that makes it a little more complicated, a little bit larger,
or support layer, of a computer chip, with cellulose nanofibril (CNF), a flexible, biodegradable material made from wood."
"The majority of material in a chip is support. We only use less than a couple of micrometers for everything else,
"Now the chips are so safe you can put them in the forest and fungus will degrade it.
CNF offers many benefits over current chip substrates, she says.""The advantage of CNF over other polymers is that it's a bio-based material and most other polymers are based petroleum polymers.
"The group's work also demonstrates a more environmentally friendly process that showed performance similar to existing chips.
The majority of today's wireless devices use gallium arsenide-based microwave chips due to their superior high-frequency operation and power handling capabilities.
"I've made 1, 500 gallium arsenide transistors in a 5-by-6 millimeter chip. Typically for a microwave chip that size,
and make a completely functional circuit with performance comparable to existing chips.""While the biodegradability of these materials will have a positive impact on the environment,
Ma says the flexibility of the technology can lead to widespread adoption of these electronic chips."
"Mass-producing current semiconductor chips is so cheap, and it may take time for the industry to adapt to our design,
2015stanford engineers find a simple yet clever way to boost chip speeds: Inside each chip are millions of tiny wires to transport data;
wrapping them in a protective layer of graphene could boost speeds by up to 30 percent June 18th, 2015a new way to image surfaces on the nanoscale:
2015stanford engineers find a simple yet clever way to boost chip speeds: Inside each chip are millions of tiny wires to transport data;
wrapping them in a protective layer of graphene could boost speeds by up to 30 percent June 18th, 2015a new way to image surfaces on the nanoscale:
2015announcements Stanford engineers find a simple yet clever way to boost chip speeds: Inside each chip are millions of tiny wires to transport data;
wrapping them in a protective layer of graphene could boost speeds by up to 30 percent June 18th, 2015$8. 5m Grant For Developing Nano Printing Technology:
2015stanford engineers find a simple yet clever way to boost chip speeds: Inside each chip are millions of tiny wires to transport data;
wrapping them in a protective layer of graphene could boost speeds by up to 30 percent June 18th, 2015a new way to image surfaces on the nanoscale:
2015research partnerships Stanford engineers find a simple yet clever way to boost chip speeds: Inside each chip are millions of tiny wires to transport data;
wrapping them in a protective layer of graphene could boost speeds by up to 30 percent June 18th, 2015$8. 5m Grant For Developing Nano Printing Technology:
this new chip can do both, and it can power the device directly from the battery.
All of those operations also share a single inductor the chip main electrical component which saves on circuit board space
the chip power consumption remains low. e still want to have battery-charging capability, and we still want to provide a regulated output voltage,
To control the current flow across their chip, El-Damak and her advisor, Anantha Chandrakasan,
whose regulation is the very purpose of the chip. Since that voltage is fixed, the variation in timing has to come from variation in capacitance.
El-Damak and Chandrakasan thus equip their chip with a bank of capacitors of different sizes.
who leads a power conversion development project as a fellow at the chip manufacturer Maxim Integrated. f youe only coming in with a small amount,
he adds. t really kind of a full system-on-a chip for power management. And that makes it a little more complicated
#Computer Chips Can Now Be made From Wood Not quite what we had in mindthe woods are lovely, dark, deep,
researchers announced the construction of computer chips made from wood. But don't expect to see hipsters advertising hand-carved artisan computer chips.
The wood product that the scientists are using is called cellulose nanofibril, or CNF. It is thin, flexible,
unlike a lot of the petroleum-based alternatives that manufacturers use to build the bases of modern computer chips.
"The majority of material in a chip is support. We only use less than a couple of micrometers for everything else,
"Now the chips are so safe you can put them in the forest and fungus will degrade it.
"It will be years before computers containing wood-based computer chips hit store shelves, but computers as fertilizer isn't a totally crazy idea.
#New laser for computer chips: International team of scientists constructs first germanium-tin semiconductor laser for silicon chips The transfer of data between multiple cores as well as between logic elements and memory cells is regarded as a bottleneck in the fast-developing computer technology.
Data transmission via light could be the answer to the call for a faster and more energy efficient data flow on computer chips as well as between different board components.
However in spite of intensive research a laser source that is compatible with the manufacturing of chips is not yet achievable according to the head of Semiconductor Nanoelectronics (PGI-9). The basis of chip manufacturing is silicon an element of main group IV of the periodic table.
Along with computer chips completely new applications that have not been pursued so far for financial reasons may
Gas sensors or implantable chips for medical applications which can gather information about blood sugar levels
#Comprehensive know-how and the full value chain, from technology development to complete systems Arraythe FBH develops the LED TECHNOLOGY in the UV-B and UV-C spectral range from the chip to the final
which are defined by gratings implemented into the semiconductor chip. Wavelength selection is realized by separately addressable sections within the laser.
With these FBH tiny monolithic light sources on chip level, a compact SERDS measurement head that is only as small as a laser pointer was realized for the first time.
"It can be anticipated that future electronic chips and portable devices will be much greener and cheaper than that of today."
#A new kind of wood chip: collaboration could lead to biodegradable computer chips Portable electronics typically made of nonrenewable,
non-biodegradable and potentially toxic materials are discarded at an alarming rate in consumerspursuit of the next best electronic gadget.
A cellulose nanofibril (CNF) computer chip rests on a leaf. Image credit: Yei Hwan Jung, Wisconsin Nano Engineering Device Laboratory A cellulose nanofibril (CNF) computer chip rests on a leaf.
Image credit: Yei Hwan Jung, Wisconsin Nano Engineering Device Laboratory The research team, led by UW-Madison electrical
or support layer, of a computer chip, with cellulose nanofibril (CNF), a flexible, biodegradable material made from wood. he majority of material in a chip is support.
Ma says. ow the chips are so safe you can put them in the forest
CNF offers many benefits over current chip substrates, she says. he advantage of CNF over other polymers is that it a bio-based material and most other polymers are based petroleum polymers.
The group work also demonstrates a more environmentally friendly process that showed performance similar to existing chips.
The majority of today wireless devices use gallium arsenide-based microwave chips due to their superior high-frequency operation and power handling capabilities.
500 gallium arsenide transistors in a 5-by-6 millimeter chip. Typically for a microwave chip that size,
and make a completely functional circuit with performance comparable to existing chips. While the biodegradability of these materials will have a positive impact on the environment,
Ma says the flexibility of the technology can lead to widespread adoption of these electronic chips. ass-producing current semiconductor chips is so cheap,
The idea is that instead of making chips from petroleum-based plastic, we'd be able to use cellulose nanofibril-a flexible,
"The majority of material in a chip is support. We only use less than a couple of micrometers for everything else,
"The result is based a bio chip, which is not only flexible enough to use in consumer electronics but an order of magnitude more environmentally-friendly."
"The chips are so safe you can put them in the forest and fungus will degrade it.
"Mass-producing current semiconductor chips is so cheap, and it may take time for the industry to adapt to our design.
< Back - Next >
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011