| Diode (157) |  |
| Led (525) | |
| Oled (95) | |
With the boiled piths, they found they could power a single LED for more than 500 hours,
"It's like trying to see the light from a feeble little LED 10cm away from a stadium floodlight,
Andraka's research incuding writing to 200 science professors led to him developing a dipstick diagnostic test which searches for a biomarker for pancreatic cancer.
This led to the unexpected discovery that the majority of mutations actually reduced or abolished PKC activity,
led the molecular analysis of several pathways known to be involved in regulating longevity to find out how they might be different.
That led to a prototype cigar-sized antenna that connects phones via public unlicensed airwaves.
Solarwindow#also generates electricity from both natural and artificial light sources such as fluorescent light emitting diodes (LED),
Weighing less than five pounds and with a cord that's 20 feet long this device offers a range of features including a LED charging indicator waterproofing for outdoor charging all-environment operation and built-in thermal sensors for protection
It was the biochemical properties of the substance that led the scientist to do so. Copsin is an exceptionally stable protein says Essig.
#Prototype uses LED LIGHTS to detect Ebola In a worst-case scenario 1. 4 million people in Liberia
##The shoebox-sized prototype diagnostic device known as the single particle interferometric reflectance imaging sensor (SP-IRIS) detects pathogens by shining light from multicolor LED sources on viral nanoparticles bound to the sensor surface by a coating
OTTLENECKPREDICTIONS The study led to another important discovery about egg-cell development. Although it was known that developing egg cells go through a ottleneckperiod that decreases the number of mtdna molecules,
Women s health units had the highest proportion of alerts that led to a remove-urinary-catheter order
#LED scanner safely peeks inside your brain New brain-scanning technology that shines dozens of tiny LED LIGHTS on the head works as well as more traditional methods without radiation exposure and bulky magnets.
It was the biochemical properties of the substance that led the scientist to do so. opsin is an exceptionally stable proteinsays Essig.
That led the researchers to study the genetic relationships of all fungus-growing ants in South america including all five known and six newly-discovered species of the genus Mycocepurus to determine
Instead some of the light from the laser scatters and the path length increases because of this multiple scattering#something scientists refer to as the aman effect. his scattered light is emitted then from the powder in a strong diffuse form that is visually similar to a bright LED light.
Skuse credits Youngâ#previous research that found mice with a mutated oxytocin receptor failed to recognize mice they previously encountered. his led us to pursue more information about facial recognition and the implications for disorders in
000 LED bulbs by stomping one foot One day it may be possible to harvest the otherwise wasted energy of your footsteps
for each the DNA length that led to crystal formation was about 18 base pairs and six single-base ticky ends.?
#Calculations find best phosphors for better LEDS University of California Santa barbara rightoriginal Studyposted by Sonia Fernandez-UCSB on November 12 2013new research makes it possible to optimize phosphorsâ##a key component in white
LED lightingâ##allowing for brighter more efficient lights. hese guidelines should permit the discovery of new and improved phosphors in a rational rather than trial-and-error mannersays Ram Seshadri a professor in the department of materials at University of California
and postdoctoral associate researcher Jakoah Brgoch appear in The Journal of Physical chemistry C. LED (light-emitting diode) lighting has been a major topic of research due to the many benefits it offers over traditional incandescent or fluorescent lighting.
LEDS use less energy emit less heat last longer and are less hazardous to the environment than traditional lighting.
and televisions LED TECHNOLOGY is becoming more popular as it becomes more versatile and brighter. According to Seshadri all of the recent advances in solid-state lighting have come from devices based on gallium nitride LEDS a technology that is largely credited to UC Santa barbara materials professor Shuji Nakamura who invented the first high-brightness
blue LED. In solid-state white lighting technology phosphors are applied to the LED chip in such a way that the photons from the blue gallium nitride LED pass through the phosphor
which converts and mixes the blue light into the green-yellow-orange range of light. When combined evenly with the blue the green-yellow-orange light yields white light.
The notion of multiple colors creating white may seem counterintuitive. With reflective pigments mixing blue and yellow yields green;
s LEDS become brighter for example as they are used in vehicle front lights they also tend to get warmer
Each image corresponds to one LED element in the LED array. Therefore in the various images, light coming from known different directions illuminates the sample.
an array of Philips LEDS that put out either 3, 500 or 4, 000 lumens (depending on the streetlight model),
"says Sun. The scientists also used a small section of their device to power a red LED,
#New LED light technology sheds light on the future of food LED growing lights, delivering sunlight whatever the weather.
New LED light technology is the key that makes it possible to build vertically integrated farms.
LED LIGHTS can be tuned to emit only a narrow wavelength of light they can be combined to create perfect lighting that provide light on the ideal spectrum for a plant s growth.
There is potential for these multifunctional techno-greenhouses built around LED grow lights to increase the quality of the food we eat
a built-in LED display brings the stark cup to life, highlighting a single line that estimates your current level of hydration
Transgenic TLX expression led to mice with enlarged brains with an elongated hippocampal dentate gyrus and increased numbers of newborn neurons.
which fuses an image processor with a wafer containing micro light-emitting diodes, or LEDS, alongside software that helps the unit properly render images.
During a recent test reviewed by The Wall street journal, Ostendo showed a working prototype: a set of six chips laid together that beamed a 3-D image of green dice spinning in the air.
Except, however, that the new Cree uses LED rather than inert gas which allows it to turn on instantly (regardless of how cold the weather is) without flickering as well as operate at a 30 percent energy savings over the traditional method.
365 days a year) and are designed to fit into existing ballasts so, unlike other LED fluorescent replacements,
The new LEDS are a bit pricey upfront (as all LED systems currently are) with an MSRP of $30 each.
It uses an LED to detect the black line, and when it senses that it over white space,
The team plans to create a prototype that entirely self-contained by replacing the external tracking system with tiny integrated displays like O-LED
This led the Stanford team to think about the creation of quantum circuits. In encoding the'S',the researchers were concentrating the electron density at certain points and energy levels.
"says Roger Pitman at Harvard Medical school, who led the original study on the effects of the drug on fear memories in patients with PTSD2.
This sometimes led to long stretches of the same letter, which is hard for sequencing machines to read
such as ultra-efficient light-emitting diodes (LEDS) and solar cells, but the technology has found mainly niche applications.
with quantum dot coatings to convert the harsh glare of LEDS into a warmer glow, to make them more appealing as long-life, low energy light bulbs.
and in the ultra-small cavities of photonic crystals#components of chip-based lasers and light-emitting diodes."
and led to scores of new human embryonic-stem-cell lines being available to NIH-funded researchers.
JEFF J MITCHELL/REUTERSA 2001 outbreak of foot and mouth disease led to the slaughter of huge numbers of sheep and cows.
Light from light-emitting diodes is sent then sideways through the slab, and some of it is scattered out of the slab in a direction determined by the spacing and orientation of the grooves.
At the University of Virginia, researchers have unveiled a new way to transmit wireless data in light waves from LED LIGHTS a much more reliable and faster alternative to radio wave Wi-fi. DNEWS:
As more light fixtures get replaced with LED LIGHTS, you can have different access points to the same network. randt-Pearce and with her former student Mohammad Noshad,
In mice infected with MRSA, injections of teixobactin led to a 100%survival rate at lower doses than vancomycin.
That led to a harsher sentence he says. In cases where images with greater resolution are needed the pair plan to use aerial imagery from drones provided local aviation and privacy laws permit.
pixels are illuminated by a white LED backlight that passes through blue, red, and green filters to produce the colors on the screen.
Manufacturers can potentially boost color by incorporating more LEDS, but this costs more and requires more energy to run.
Manufacturers use a blue LED in the backlight, but without the need for conversion phosphors.
and others developed a pioneering technique for producing quantum dot LEDS (QLEDS). To do so, they sandwiched a layer of quantum dots, a few nanometers thick, between two organic thin films.
Coe-Sullivan enrolled in 15.390 (New Ventures) to further develop a business model. hat led to the more rigorous formation of a sales and marketing plans,
This could shrink the AC-DC power converters for products such as LED LIGHTS flat-screen TVS, gaming consoles, laptops, electric bikes,
the company set its sights on shrinking power converters for LED LIGHTS. About a year later,
which is developing smart LED LIGHTS that can wirelessly connect to the Internet and change colors to match people moods p
#Excitons observed in action for the first time A quasiparticle called an exciton responsible for the transfer of energy within devices such as solar cells LEDS
The efficiency of devices such as photovoltaics and LEDS depends on how well excitons move within the material he adds.
For some applications such as LEDS Deotare says it is desirable to maximize this trapping so that energy is lost not to leakage;
and LEDS Baldo says. While these experiments were carried out using a material called tetracene a well-studied archetype of a molecular crystal the researchers say that the method should be applicable to almost any crystalline or thin-film material.
This allows the team to use inexpensive hardware off-the-shelf light-emitting diodes (LEDS) can strobe at nanosecond periods,
Activating the projections led to compulsive sucrose-eating and increased overeating in mice that were full.
peeking out at different indented spots around the circumference, and LED LIGHTS. When activated, the camera snaps photos from all lenses, a few times every second.
Are formed by Electrohydrodynamic Jet Printing for Light-emitting diodes. Their paper was published in Nano Letters an ACS journal.
and operating conditions that allow for high-resolution printing of layers of quantum dots with precise control over thickness and submicron lateral resolution and capabilities for use as active layers of QD light-emitting diodes.
Writing in IEEE Spectrum on Monday Prachi Patel similarly made note that Quantum dots (QDS) are light-emitting semiconductor nanocrystals that used in light-emitting diodes (LEDS) hold the promise of brighter faster displays.
They sandwiched these patterns between electrodes to make bright QD LEDS. Patel also reported on the team's future efforts.
Princeton team explores 3d printed quantum dot LEDS More information: High-resolution Patterns of Quantum dots Formed by Electrohydrodynamic Jet Printing for Light-emitting diodes Nano Lett.
Article ASAP. DOI: 10.1021/nl503779eabstracthere we demonstrate materials and operating conditions that allow for high-resolution printing of layers of quantum dots (QDS) with precise control over thickness and submicron lateral resolution and capabilities for use as active layers of QD light-emitting diodes (LEDS).
The shapes and thicknesses of the QD patterns exhibit systematic dependence on the dimensions of the printing nozzle and the ink composition in ways that allow nearly arbitrary systematic control when exploited in a fully automated printing tool.
Homogeneous arrays of patterns of QDS serve as the basis for corresponding arrays of QD LEDS that exhibit excellent performance.
Sequential printing of different types of QDS in a multilayer stack or in an interdigitated geometry provides strategies for continuous tuning of the effective overall emission wavelengths of the resulting QD LEDS.
It was research conducted by Yingnan Zhao of the University of Twente's MESA+Institute for Nanotechnology that led to this discovery.
whether the crystalline structure of the materials is mismatched-lowering the manufacturing cost for a wide variety of semiconductor devices such as solar cells lasers and LEDS.
For example in photonic devices like solar cells lasers and LEDS the junction is where photons are converted into electrons or vice versa.
and LEDS remain very expensive. But stacking 2-D materials doesn't require the crystalline structures to match.
and active electronics via 3-D printing (Phys. org) As part of a project demonstrating new 3-D printing techniques Princeton researchers have embedded tiny light-emitting diodes into a standard contact lens
We were able to 3-D print an entire device in this case an LED. The hard contact lens is made of plastic.
The researchers used tiny crystals called quantum dots to create the LEDS that generated the colored light.
In this case we had a cube of LEDS he said. Some of the wiring was vertical
This allowed for conformal 3-D printing of an LED on the contact lens s
#Nanotechnology against malaria parasites Malaria parasites invade human red blood cells they then disrupt them and infect others. Researchers at the University of Basel and The swiss Tropical and Public health Institute have developed now so-called nanomimics of host cell membranes that trick the parasites.
transistors for flexible electronics high-efficiency light-emitting diodes resonator-based mass sensors and integrated near-field optoelectronic tips for advanced scanning tip microscopy.
and near-surface properties of materials to optimize nanowire LEDS and to produce nanowires with controlled diameter for a collaborative project involving printable transistors for millimeter-wave reconfigurable antennae e
pixels are illuminated by a white LED backlight that passes through blue, red, and green filters to produce the colors on the screen.
Manufacturers can potentially boost color by incorporating more LEDS, but this costs more and requires more energy to run.
Manufacturers use a blue LED in the backlight, but without the need for conversion phosphors.
and others developed a pioneering technique for producing quantum dot LEDS (QLEDS). To do so, they sandwiched a layer of quantum dots, a few nanometers thick, between two organic thin films.
Coe-Sullivan enrolled in 15.390 (New Ventures) to further develop a business model. hat led to the more rigorous formation of a sales and marketing plans,
Zheng Ling a doctoral student from Dalian spent a year at Drexel spearheading the research that led to the first MXENE-polymer composites.
This led the group to produce nanostructures that have historically been considered impossible to assemble. The widely used method of metamaterial synthesis is top-down fabrication such as electron beam
#Beyond LEDS: Brighter new energy saving flat panel lights based on carbon nanotubes Even as the 2014 Nobel prize in Physics has enshrined light emitting diodes (LEDS) as the single most significant and disruptive energy-efficient lighting solution of today scientists
around the world continue unabated to search for the even-better-bulbs of tomorrow. Electronics based on carbon especially carbon nanotubes (CNTS) are emerging as successors to silicon for making semiconductor materials.
And they may enable a new generation of brighter low-power low-cost lighting devices that could challenge the dominance of light-emitting diodes (LEDS) in the future
about a hundred times lower than that of an LED. In the journal Review of Scientific instruments from AIP publishing the researchers detail the fabrication
For instance LEDS can produce 100s Lumen per Watt and OLEDS (organic LEDS) around 40. Although the device has a diode-like structure its light-emitting system is not based on a diode system
Although the researchers did not have precise control over the nanowire morphology they did observe that higher concentrations of H2o2 led to thicker nanowires.
Gallium nitride micro-rods grown on graphene substrates Bendy light-emitting diode (LED) displays and solar cells crafted with inorganic compound semiconductor micro-rods are moving one step closer to reality thanks to graphene and the work of a team of researchers in Korea.
on graphene to create transferrable LEDS and enable the fabrication of bendable and stretchable devices.
To create the actual Gan microstructure LEDS on the graphene substrates the team uses a catalyst-free metal-organic chemical vapor deposition (MOCVD) process they developed back in 2002.
and reliability of Gan micro-rod LEDS fabricated on graphene to the test they found that the resulting flexible LEDS showed intense electroluminescence (EL)
Growth and characterizations of Gan micro-rods on graphene films for flexible light-emitting diodes by Kunook Chung Hyeonjun Beak Youngbin Tchoe Hongseok Oh Hyobin Yoo Miyoung Kim and Gyu
For the impedance spectroscopy measurements, the sample was installed beneath an LED broadband white light, calibrated to one Sun illumination (natural sunlight).
This result could be the basis for next-generation flexible and transparent computing, better light-emitting diodes,
or LEDS, and solar technologies.""Heterojunctions are fundamental elements of electronic and photonic devices, "said senior author Xiaodong Xu, a UW assistant professor of materials science and engineering and of physics."
"Our experimental demonstration of such junctions between two-dimensional materials should enable new kinds of transistors, LEDS, nanolasers,
Examples of applications are large displays, large interactive touch screens, photovoltaic solar panels, light-emitting diode panels, smart phones,
Improved LED lighting is one possibility, as well as better TVS with more accurate colors. Wider use of solid state lighting might cut power use for lighting by nearly 50 percent nationally.
they form the basis of both LEDS and LCDS (liquid crystal displays.""This could make a transparent,
In addition the scientists have invented a means of simultaneously using the nanowire tips as LEDS to illuminate a tiny sample region with optical radiation
so that it functions as an LED. Optical radiation can serve to excite the sample in a different way from the microwave signal
While these interests may seem divergent the synthesis of them led him to Brown University#s Braingate Group where he is the Senior Research and development Engineer.
who led the current research. hey found the lesions were very persistent in DNA, meaning we don have a repair system to take them out,
With the patient in a prone position, the doctor affixes a small plastic box containing two LEDS to the patient's shin.
while the LEDS act as the pencil. If the distance between the two changes i e. if the leg becomes shorter or longer,
that will change the arc traced by the LEDS. The doctor takes this measurement twice once right before the operation
This led the students to the Spoken language Systems Group directed by James Glass, a senior research scientist at CSAIL.
who led the current research. hey found the lesions were very persistent in DNA, meaning we don have a repair system to take them out,
The research that led to a workable solid-state electrolyte was part of an ongoing partnership with the Korean electronics company Samsung, through the Samsung Advanced Institute of technology in Cambridge, Massachusetts,
The key observation was increased that this number of coupled pairs led to superconductivity, which the researchers measured by identifying an energy gap between the material's conducting and nonconducting electrons.
This led to a more than 90 percent reduction in power consumption compared with conventional FETS. The scientists and engineers detailed their findings in the 1 oct. issue of the journal Nature. his transistor represents a major breakthrough in the electronics and semiconductor industry
CA-based Soraa who is using the technology in their connected LED lamps. ee built the unique architecture where devices form a native,
Treatment of the tumours with anti-erbb2/neu mabs followed by interferon-gamma led to a considerable inhibition of tumour growth
To address the problem, the team of researchers, led in part by Thomas Angelini, assistant professor in the department of mechanical and aerospace engineering at the University of Florida, took advantage of the physical properties of a commercially available granular hydrogel made up of 7 m-wide particles.
and LEDS operating under the focal point of an optical lens. The solar-to-electricity conversion efficiency of this CPV module is as high as 31 percent.
#Electroluminescence with Phosphor Nanoparticles Holds Promise for Modern Lighting Light-emitting diodes (LEDS) are the modern lighting devices used in lamps, signals, signs or displays.
This led them to believe that Nano-85 itself was actually causing the VLPS to break apart.
That led to further investigations into nanomaterials. One accomplishment was a so-called molecular ruler made of gold nanoparticles tethered to DNA strands,
The key discovery that led to the formation of Optokey was the development of the nanoplasmonic resonators to dramatically improve the signal and reliability of Raman spectroscopy.
and is designed to track an LED, which was added to the mouthpiece of the Jamboxx. After obtaining research grants from the New york state Trade Adjustment Assistance Center (NYSTAAC) and funds from My Music Machine, Inc. and support from SUNY Poly CNSE,
The use of low-cost components such as LEDS, reflectors and USB detectors, combined with the all-plastic housing and lenses, will allow future versions of the prototype to be mass-produced h
The security tag consists of a paper tag with an embedded battery and two coloured LEDS.
or any on-body devices or sensors that users have to constantly wear or carry, just LED LIGHTS on the ceiling and photodiodes on the floor.
They built the-first-of-its-kind light sensing testbed in the Dartnets lab using off-the-shelf LED LIGHTS, photodiodes, and microcontrollers.
#Study Reveals the Genetic Start-up of a Human Embryo An international team of scientists led from Sweden's Karolinska Institutet has mapped for the first time all the genes that are activated in the first few days of a fertilized human egg.
Small molecules also are key elements in technologies like solar cells and LEDS. However, small molecules are notoriously difficult to make in a lab. Traditionally
The use of low cost components such as LEDS reflectors, and USB detectors, combined with the all-plastic housing and lenses will allow for future versions of the prototype to be mass-produced
The organic molecules of this chemical are used widely in electronic devices such as solar cells, LEDS and transistors.
The limitations of early telescopes led to questions about the accuracy of the constant counting of sunspots for the last 300 years, leading to the Group Sunspot number being started in 1998.
While the resulting inability to degrade lysosomal DNA led to lethal autoimmunity, once again cgas inhibition rescued the mice, the researchers report t
The use of low cost components such as LEDS reflectors, and USB detectors, combined with the all-plastic housing and lenses will allow for future versions of the prototype to be mass-produced d
Their results showed that Vasotide led to decreased blood vessel growth in all three models when the agent was administered by either systemic injection,
#Breakthrough to the development of energy saving devices for the next generation Wide-gap semiconductors such as gallium nitride (Gan) are used widely for optical devices such as blue LED
and metabolism, finding that relatively low-level concentrations of the emulsifiers resulted in distinct alterations to the gut microbial ecosystem (microbiota) and led to low-grade inflammation and the onset of metabolic syndrome.
#Terralux Battles Commoditization By Integrating Smarts With LEDS For Commercial Lighting Refits LED lighting technology has advanced in leaps and bounds in the last few years.
Less than a decade ago, LEDS were both ineffective and expensive. Not only did they have low output,
Fast forward to today and LEDS have improved greatly in efficacy, now demonstrating some of the highest light outputs,
At the same time, the economics of LEDS are now comparable with other light sources. These changes have resulted in LEDS displacing CFLS as the choice for organizations looking to save money
and deliver an environmentally friendly lighting alternative. But while these huge benefits for LED consumers have come to fruition,
LED TECHNOLOGY rapidly becomes commoditized meaning that LED vendors, once selling into a top-level market, now need to compete with other vendors based on price.
The company is pushing an Internet of things (Iot) slant on LED LIGHTS. LEDSENSE units include sensors that can determine building temperature
Advanced sensors provide safety and security information and alerts all through the LED LIGHTS. LEDSENSE is primarily an energy efficiency tool LEDSENSE can,
%But these gains are created not simply through the power reduction that LEDS bring, but rather through combining this benefit alongside smart lighting control.
Previous work in Lewis laboratory led to a major advance in the design. The work showed that adding a nanometers-thick layer of titanium dioxide (Tio2) material found in white paint
The combined effect of those patterns led to final images with 62-nanometer resolutionuch better than standard SIM and a threefold improvement over the limits imposed by the wavelength of light."
leaving open a default pathway that led to photoreceptor genesis. The scientists detailed their work in the journal Development,
Leddar Technology Overview Leddar (acronym for light-emitting diode detection and ranging) is patented a sensing technology developed by Leddartech,
Combined with the use of visible or infrared LEDS to perform time-of-flight measurements,
the Leddar sensor's LEDS and emitter optics are used to create a diffuse beam covering a wider area of interest.
Time-of-Flight Principle Leddar sensors use LEDS to generate very short light pulses, typically 100,000 pulses per second.
or more LEDS into a pattern that best fits the photodetector geometry. The purpose of the reception optics is to collect the backscatter of light from objects in that beam onto the photodetector.
its ability to detect multiple objects in each segment and lateral discrimination (multi-element platform), its long detection range with low-power LEDS, real-time object-tracking capabilities, detection
< Back - Next >
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011