"The software for operating the system and analysing the data was developed in-house and around Rs 100 crore value could be put for that,
"The software for operating the system and analysing the data was developed in-house and around Rs 100 crore value could be put for that,
and converts'breath signals'into words using pattern recognition software and an analogue-to-digital converter.
"One purpose of this experiment was to show we could integrate bacterial catalysts with semiconductor technology.
To do that, they need model systems to study nature's best designs, especially the catalysts that convert water and carbon dioxide into sugars at room temperatures."
150, were associated with inpatient stays in health care facilities, according to the Active Bacterial Core surveillance report by the Centres for Disease Control and Prevention in US.
#A super computer that knows if you're going to die NEW YORK: A super computer developed in the US can predict the likelihood of a person's death with almost 100 per cent accuracy,
a media report said. The machine, installed at Boston's Beth Israel Deaconess Medical centre, draws on the data of more than 250,000 people collected over a period of 30 years to make speedy diagnoses,
Patients at the hospital are linked up to the super computer which collects and analyses data about their condition every three minutes,
"When the computer says no, doctors can"predict with 96 per cent confidence "when patients may die."
"If the computer says you're going to die, you probably will die in the next 30 days,
#Paraplegic man walks using only his brain power A brain-to-computer echnology that can translate thoughts into leg movements has enab ed a man paralysed from the waist down by a spinal cord injury to become the first such
and instead send messages through a computer algorithm to elec rodes placed around the patient's knees to trigger controlled eg muscle movements.
but incremental achievement in the development of brain-computer interfaces that may one day help stroke
and instead send messages through a computer algorithm to electrodes placed around the patient's knees to trigger controlled leg muscle movements.
but incremental achievement in the development of brain-computer interfaces that may one day help stroke
made from the same material found in smartphone and TV screens, which could improve vision in older people with presbyopia and cataracts.
which we probably know better as the material used in the screens of TVS and smartphones,
But even the most jaded among them might be surprised by a process that computer scientists in California
A computer processes the transfer in 30 milliseconds, no time at all for a human observer
Additionally, according to Balaresque, the Lily software will even be able to learn a user face through a computer vision system that will always keep a user in the shot.
According to the researchers, the printable panels are capable of powering entire skyscrapers and theye hoping to see commercial market production for the printed panels for use starting in low-power applications in the very near future.
According to the project website, the technology has the potential to ramatically reduce the dependence on more traditional sources of electricity in developed countries such as Australia,
the printed cells offer the potential to allow printing onto actual housing materials including glass
the scientists also looked at ways of applying the technology onto smaller objects such as ipads."
"ipad covers, laptop bags, skins of iphone will no longer be just for casing electronics, but to collect some energy as well
a dissolvable tablet that treats seizures While wee seen a lot of interesting 3d printed medical applications appear in surgery rooms already think about 3d printed titanium implants
#Open Space agency gears up to launch open source 3d printed telescope For those of us who love space
(which features a 9-centimeter mirror) of their final Open source Ultrascope design this upcoming October at the San diego Maker Faire,
and computers have struggled simply to continue to pick out your voice when nearby people are talking simultaneously.
our proposed method is a unique hardware-based approach by exploiting carefully designed acoustic metamaterials,
According to Kim Francois, a spokeswoman from Materialise, the company will contribute with training for digital modeling and 3d printing procedures, clinical software development and technology support.
the key component in this entire venture is a custom-made and very impressive solar-powered, plug-and-play ultraportable 3d printing system.
A combination with easy-to-use software like Openscad is made easily. And remarkably it was conceived in a way similar to how many of us start out:
while an entire catalog of 3d printable files can be found on a supplied USB memory stick.
the acetabular cup is manufactured by the most advanced 3d metal printing technology. In the past, the cup was made through titanium alloy casting,
in the future custom printing will ensure a perfect fit. So far, dozens of patients have received 3d printed hip replacement surgery,
By observing the transmitted video on a TV monitor, doctors can get a firsthand view of the patient organs
"A'wall wind'of stacked Microcubes3d printing technology, provided with the support of 3d Systemscloud-based manufacturing service Quickparts, played a major role in helping Yost realize this project.
Quickparts utilized 3d System SLS printing technology and three different materials: Duraform polyamide (PA), Duraform glass-filled (GF),
instead uses active mixing and fast-switching nozzles, allowing for the printing of concentrated viscoelastic inks and the simultaneous control of composition and geometry during printing.
Lewis is the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard John A. Paulson School of engineering and Applied sciences (SEAS) and a Core Faculty member at the Ywss Institute for Biologically Inspired Engineering at Harvard.
and filtering out the others. his type of measuring method delivers similar results to the edge detection filter in an image-processing software,
which allows the outline of prominent photo objects to be identified with the click of the mouse,
The team took advantage of 3d printing instant feedback and rapid prototyping to experiment with new shapes, printing speeds, battery technologies, cleaner burning fuels,
in order to enable the gripper to be usable for a variety of existing hardware bases, simply by swapping out the 3d printed interface.
such as small booksut with future research, that might not be a problem for long. uture work will take these core principles
The OLO, for all intents and purposes, is powered a battery box (consisting of seven parts plus an engine) that fits on top of your Android, OS or Windows smartphone.
Because of the sharing-function of the app, the OLO is also being touted as the first ocial3d printer. he idea behind the development of OLO was to create a cheap 3d printer that anyone could easily use,
Despite more and more ser-friendly3d printers and 3d printing services hitting the market, the truth is that most people either do not understand the technology,
It an entry-level device for the curious, that might just get them excited enough to eventually upgrade to more complex 3d printer models and software.
and battery power source (standard AA 1. 5v that last for at least 100 printings), it is also ideal for anyone who is traveling
or other artistic models can be made for display or as gifts. Yet another advantage of resin 3d printing in comparison to FDM, for example, is that parts can be printed at full density in almost the same amount of time as hollow
the OLO simply replaces expensive lasers and projectors with the phone own LED display. When you place your smartphone underneath the glass surface of the resin container,
the app will make the screen light up in a pattern specific to the object you are printing.
optimized for the OLO smartphone display light-source. In order to get the OLO on the market and into the hands of new or would-be makers,
An app was created also to back the hardware with an integrated software. It called the pthalmicdocs Eye Appand will be available for download from the Apple App store from May 22.
D printing Mushtari is a wonderful example of how far this collaboration can bring us.
what real computer aided manufacturing is ultimately about s
#3d Systems Demos Virtual Surgeries and Soft 3d printed Models in New orleans On top of its massive 3d printing portfolio and Quickparts services, 3d Systems also has an extensive medical design and 3d printing wing.
Both pieces of tech will be on display at the Annual Meeting for the American Urological Association in New orleans from today until May 19.
The microfish were manufactured with microscale continuous optical printing (COP), an advanced, high-resolution form of 3d printing that was created in Chen laboratory.
The COP printer functions at a rapid pace, and is able to produce hundreds of their microfish within seconds of printing.
What makes this printer so efficient is its digital micromirroring array device chip (DMD), containing millions of micromirrors that function separately from one another to cast the desired microfish design onto photosensitive material,
which is solidified then once exposed to UV LIGHT. This advanced process results in these 3d printed microfish, able to swim naturally through liquids,
since a egacy3d printer can still inspire advanced research studies and projects. The ultimate goal of Dr. Wong study is to demonstrate the technical feasibility of powering an FFF 3d printer using solar energy to manufacture functional
The findings from this work were used to design an ultraportable, plug-and-play, solar-powered 3d printing system suitable for transport to,
photovoltaic panels, and a 3d printer, any plastic and possibly ceramics or even metal (with binder jetting or future wire melting technologies) objects could be produced anywhere in the world.
Using Envisiontec 3d bioplotter they were able to take their research to new levels creating very complex multilateral 3d structures following specific designs previously programmed on the computer. his is an incredible advantage
rom this, we were able to design an implant with a rigid sternal core and semi-flexible titanium rods to act as prosthetic ribs attached to the sternum.
e built the implant using our $1. 3 million Arcam printer. The printer works by directing an electron beam at a bed of titanium powder
in order to melt it. This process is repeated then building the product up layer-by-layer until you have a complete implant. 3d printing has significant advantages over traditional manufacturing methods, particularly for biomedical applications.
and printer right at the hospital to create custom nerve guides right on site to restore nerve function.
A model of the modified Leapfrog Printer used in production. 4d printing can be defined as the combined use of advanced 3d printing technology and the change of form over time.
On display at ORNL EERE Industry Day, is integrated a complete energy system, consisting of a 3d printed home with a small kitchenette,
#Freedee Printing Solutions Launches Hungary First 3d Academy 3d Academy may be one of the top trends in European 3d printing lately.
one of them is Freedee Printing Solutions, one of Hungary first 3d printing and 3d scanning service and retailer.
scalable 3d printer farm using Makerbot hardware and software, developed especially for schools and universities. At the 3d Academy, Freedee will have 10 Makerbot Replicators
and one Replicator Z18, complemented by several 3d scanners and educational materials. These will be used as a base for the courses aimed at the general public and for collaborations with public schools.
which warms up the body core. As the warm blood leaves the core and travels toward the surface of the gills, it transfers its heat to the cold blood that is travelling back from the gills where it has absorbed oxygen from the water.
Wegner likens the system to a car radiator and says the exchange stops the heat from nearing the gill surface where it would be cooled by the water flow through the gills.
"The core message is using evidence to drive healthcare reform, "says Professor Marc Tennant of the University of Western australia,
They then used the computer's predictions to run practical experiments to test the results.
Their innovative Hydrelio Floating PV system allows standard PV panels to be installed on large bodies of water such as:
Software developed at the IISC greatly simplifies the procedure by using software to rapidly analyse images which can be taken with a handheld fundus camera
Seelamantula says mass screening of fundus images by semiskilled people is possible with pre-screening software. he software allows rapid screening of the images and highlights those that need the attention of the specialist.
but there is interest in making it suitable for mass application by converting the Java-based software into an Android app for example,
evaluate toxicity and display the results in one simple process. Dr. Wang Zhiping, Director of research Programs at Agency for Science, Technology and Research's (A*STAR) Singapore Institute of Manufacturing Technology (SIMTECH
After seven days there was a sixfold increase in the formation of new blood vessels in the mouse back muscles
effectively measuring a panel of potential biomarkers simultaneously, rather than just one, to better differentiate between different pathologies,
Very few think about the technology beneath their screens that conducts heat away from internal electronic components
or greater thermal conductivity. iniaturization results in less space to dissipate heat generated from today high-performance processors,
which are suited for use in a range of applications including tablets, lap tops, flat screen TVS and EMI shielding s
#Electroluminescence with Phosphor Nanoparticles Holds Promise for Modern Lighting Light-emitting diodes (LEDS) are the modern lighting devices used in lamps, signals, signs or displays.
Rohit Bhargava, University of Illinois Using a combination of advanced microscope imaging and computer analysis,
The computer then translates spectral information from the microscope into chemical stain patterns, without the muss or fuss of applying dyes to the cells. e're relying on the chemistry to generate the ground truth
Aizenberg is also co-director of the Kavli Institute for Bionano Science and Technology and a core faculty member at Harvard Wyss Institute for Biologically Inspired Engineering, leading the Adaptive Materials Technologies platform there.
After using computer simulations to test their novel approach, in collaboration with Prof. Anna C. Balazs from the University of Pittsburgh, Aizenberg team conducted proof-of-concept experiments in which they successfully separated thrombin, an enzyme in blood plasma that causes the clotting of blood
Currently, colors on computer and iphone screens come from dye materials pre-placed on the pixels.
The new technology may hold promise for many applications such as for jewelry, automotive interior trim, aviation, signage, colored keypads, wearable and electronic displays.
The initial target market is Cell Phone and Tablet glass surfaces. Tungstenglass is based a borosilicate glass that is infused with tungsten and carbon nanotubes.
Users are supported for software for system control, image capture and editing. The Microscopy business group has sales companies in 33 countries.
exterior shell and a conductive iron-nickel core. In a paper published this week in the Journal of Applied Physics
National Centre for Basic Sciences, mixed nickel oxide and iron oxide as a hybrid material and fabricated the novel core/shell nanostructure electrode."
In Singh's experiment, the core/shell hybrid nanostructure was fabricated through a two-step method. Using a standard electro-deposition technique,
eventually developing a highly porous iron oxide-nickel oxide hybrid shell around the iron-nickel core."
"The advantage of this core/shell hybrid nanostructure is that the highly porous shell nanolayer provides a very large surface area for redox reactions
"The remarkable electrochemical performances and material properties suggest that the iron oxide-nickel oxide hybrid core/shell nanostructure could be a reliable and promising candidate for fabricating the next generation lightweight, low-cost
by using MRI-like technology and proprietary software that uses holographic algorithms. The microscope is called the 3d Cell Explorer.
It combines state-of-the-art hardware with cutting-edge imaging software to record stunning 3d images of entire living cells within seconds and with a higher resolution than any conventional microscope available in the market.
The photographic"slices"are recombined then using clever holography software that digitally"stains"the cells, labeling its different parts.
The software, called STEVE, is now available for download and can be used to"travel"virtually inside cells.
medics and students all around the world will be enabled to travel inside 3d cells in full color by simply downloading STEVE on their laptop"says Nanolive CEO Yann Cotte.
a Core Faculty member at the Wyss Institute for Biologically Inspired Engineering at Harvard university and the Amy Smith Berylson Professor of Materials science at Harvard School of engineering and Applied sciences (SEAS), has developed an entirely new,
#Canatu Announce Multitouch, Button-Free Automotive Panels with Carbon nanobud Films Canatu, a leading manufacturer of transparent conductive films, has in partnership with Schuster Group
and Display Solution AG, showcased a pioneering 3d encapsulated touch sensor for the automotive industry. The partnership is delivering the first ever,
3d shaped true multitouch panel for automotives, being the first to bring much anticipated touch applications to dashboards and paneling.
The demonstrator provides an example of multifunctional display with 5 finger touch realized in IML technology.
#Touch-Sensitive Flexible Silicone Stickers Worn on the Skin Can Help Control Mobile devices Someone wearing a smartwatch can look at a calendar
A method currently being developed by a team of computer scientists from Saarbrücken in collaboration with researchers from Carnegie mellon University in the USA may provide a solution to this problem.
and executes commands and thus controls mobile devices. Depending on the type of skin sticker used, applying pressure to the sticker could, for example,
Users can also design their iskin patches on a computer beforehand to suit their individual tastes.'
For example, a keyboard sticker could be used to type and send messages. Currently the sensor stickers are connected via cable to a computer system.
According to Steimle, inbuilt microchips may in future allow the skin-worn sensor patches to communicate wirelessly with other mobile devices.
The publication about'iskin'won the'Best Paper Award'at the SIGCHI conference, which ranks among the most important conferences within the research area of human computer interaction.
Korea, and beforehand at the computer expo Cebit, which takes place from the 16th until the 20th of March in Hannover (hall 9, booth E13) E
forming a water-soluble nanoparticle with the drug hidden in its core. These nanoparticles are highly soluble in blood
The former have a shell that is bonded directly to the core, but yolk-shell particles feature a void between the two equivalent to where the white of an egg would be.
the aluminum core continuously shrinks to become a 30-nm-across olk, which shows that small ions can get through the shell.
Computer-assisted technology developed especially for this purpose combines the advantages of both methods and suppresses unwanted noise.
while a first pulse excites the sample under study, a second pulse monitors the change in the sample.
the teams led by the two Dresden physicists have managed to combine all the advantages of both methods in their nanoscope. e have developed software with a special demodulation technology with whichn addition to the outstanding resolution of near-field
Their code can quickly determine general structure in only a few minutes on a desktop computer. This approach is an important step in unlocking the door to new advances in biophysics
CAMERA brings together mathematicians, experimental scientists, computer scientists, and software engineers to develop and deliver new mathematical tools
and software to data and imaging challenges at the DOE facilities, including work at synchrotron light sources and nanoscience research centers.
OE light sources offer a rich environment for tackling wonderful math problems whose solutions can make a major impact on fast moving sciencesays Sethian. ombining Zwart insight into the problem with Donatelli
The study, published today (date) in Nature Communications shows that cancer mouse models injected with immune cells carrying SPIOS and armed with the cancer killing oncolytic virus (OV)
#Universitat Jaume I Patents Graphene-Based Catalysts for Energy conversion and Storage Researchers at the Universitat Jaume I have developed materials based on graphene that can catalyse reactions for the conversion and storage of energy.
Thus, the patented materials can be used both in the development of catalysts as well as storage batteries or other energy types p
Computer software then extracts the information in the moiré images and translates it into a three-dimensional, high-resolution reconstruction.
it should be fairly straightforward to make the SIM technologies accessible and affordable to other labs."Most of the magic is in the software, not the hardware,
One purpose of this experiment was to show we could integrate bacterial catalysts with semiconductor technology.
especially the catalysts that convert water and carbon dioxide into sugars at room temperatures.""This is not about mimicking nature directly
Enclosed within the platelet membranes are made nanoparticle cores of a biodegradable polymer that can be metabolized safely by the body.
The nanoparticles can be packed with many small drug molecules that diffuse out of the polymer core and through the platelet membrane onto their targets.
the platelet membranes were broken up into much smaller pieces and fused to the surface of nanoparticle cores.
This quality makes ferroelectric materials useful for an array of electronic applications, such as computer memory chips.
One of the most critical biological and medical tools available today, it lies at the core of genome analysis. Reading the exact make-up of genes,
This is a crucial step in creating a new generation of foldable electronics-think a flat-screen television that can be rolled up for easy portability-and implantable medical devices.
The researchers used mouse embryonic fibroblast cells to determine biocompatibility; that, along with the fact that the stretchability of gold nanomesh on a slippery substrate resembles the bioenvironment of tissue
and re-scan it repeating the process until the desired spatial resolution is achieved before combining the data from each scan using a computer algorithm.
In comparison with other vapor sensors based on nanosheets, the new photonic architecture displays markedly increased response times, higher sensitivity and long-term stability. his unique combination of properties enables it to track
"Nowadays, software and techniques to design and simulate DNA NANOSTRUCTURES are extremely powerful and user friendly, and thus, researchers can easily construct their own DNA-objects for various uses.
Lithium-ion batteries have been used commonly in laptop and tablet computers, electric vehicles and renewable energy systems for more than two decades.
#Nanostructure Changes Colour When Finger Comes Near Touchscreens suffer from mechanical wear over time and are a transmission path for bacteria
What they really want is to use it in touchless displays. ecause these sensors react in a very local manner to any increase in moisture,
it is quite conceivable that this sort of material with moisture-dependent properties could also be used for touchless displays
and monitors, said Ganter. Touchless screens of this kind would require nothing more than a finger to get near the display to change their electrical or optical properties and with them the input signal at a specific point on the display.
Taking phosphatoantimonate nanosheets as their basis the Stuttgart scientists then developed a photonic nanostructure which reacts to the moisture by changing colour. f this was built into a monitor,
the users would then receive visible feedback to their finger motionexplained Katalin Szendrei, also a doctoral student in Bettina Lotsch group.
for instance by moving a finger towards the screen. he reason for this lies in the storage of water molecules between the phosphatoantimonate layers,
A layer protecting against chemical influences has to let moisture through The scientists can imagine their materials being used in much more than just future generations of smartphones, tablets or notebooks. ltimately,
we could see touchless displays also being deployed in many places where people currently have to touch monitors to navigate,
Displays in public placesthat are used by many different people would have distinct hygiene benefits if they were touchless.
if theye going to be used in anything like a display. And that, again, has to meet not one but two different requirements:
and art-based software programs with their breath. e are delighted to further Governor Andrew M. Cuomo vision for a vibrant high-tech sector in New york state as
a USB-powered breath-controlled device that resembles a harmonica and comes with special software to allow musicians to play digital music or control a computer with varying levels of breath.
The device consists of a tilt sensor for octave selection a pressure sensor to produce sound,
Interestingly, a subsequent challenge with a lethal strain of mouse malaria parasite in these vaccinated animals showed considerable protection against malaria.
The use of low-cost components such as LEDS, reflectors and USB detectors, combined with the all-plastic housing and lenses, will allow future versions of the prototype to be mass-produced h
Phones, laptops and other electronic devices all use memory chips to function. To be desireable they must be fast,
Random access memory (RAM) is an example of volatile memory. Nonvolatile memory is slow but stable and it continues to store the data even
Engineers led by Stanford have demonstrated a way to create memory that combines the stability of flash memory with the speed of RAM.
Previously, printing techniques have been applied to integrate electronics into plastic labels only, but with the VTT methods it is now also possible to produce more environmentally friendly paper-based security tags.
electronic circuits and sensors can be integrated directly into different materials by printing, thus producing novel security tags for sealing shipments
In the ROPAS project, VTT showed that roll-to-roll technology for printing electronics is suited also to the manufacturing of paper-based security tags.
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011