| Carbon nanofiber (5) |  |
| Nanofiber (107) | |
| Carbon nanofiber (5) | |
| Nanofiber (107) | |
using carbon dioxide and carbon nanofibers.####The first step in the process of creating synthetic gas requires the conversion of carbon dioxide into carbon monoxide.
Researchers replaced the silver with carbon nanofibers, and paired those with nitrogen to convert carbon dioxide into carbon monoxide.
spinning out nanofibers for use in water filters body armor and smart textiles; or propulsion systems for fist-sized nanosatellites.
spinning out nanofibers for use in water filters body armor and smart textiles; or propulsion systems for fist-sized nanosatellites.
Conductive nanofiber networks for flexible unbreakable and transparent electrode e
#Harnessing an unusual'valley'quantum property of electrons Yoshihiro Iwasa and colleagues from the RIKEN Center for Emergent Matter Science the University of Tokyo and Hiroshima University have discovered that ultrathin films of a semiconducting material have properties that form the basis for a new kind of low-power electronics termed'valleytronics'.
#Conductive nanofiber networks for flexible unbreakable and transparent electrodes Transparent conductors are required as electrodes in optoelectronic devices, such as touch panel screens, liquid crystal displays, and solar cells.
Tokyo Institute of technology researchers report the first development of a facile method for the fabrication of flexible and unbreakable transparent electrodes using nanofibers.
Two-dimensional aluminum (Al) nanofiber networks offering transparent conductors were fabricated by simple wet chemical etching of Al metalized polymer films using an electrospun polystyrene nanofiber mask template.
of Nanotechology) and their colleagues have succeeded now in producing a novel type of nanofiber whose highly ordered and porous structure gives it an extraordinarily high surface-to-volume ratio.
Screen Shot 2015-05-04 at 7. 29.15 AM To create the nanofiber thin membrane that could be produced at scale,
Can nanofiber save your life? Researchers in professor Margaret Frey lab create fibers hundreds of times thinner than a human hair that can capture toxic chemicals and pathogens.
Frey and her colleagues are replacing that cost by making the devices with nanofibers from plastics,
Using nanofibers, processes done in a medical testing lab for example, purifying samples, mixing ingredients, capturing bacteria can be done with material about the size of a deck of cards.
Frey and her students have encapsulated pesticides into biodegradable nanofibers. This keeps them intact until needed
these nanofibers just might save a life, she said o
#Scientists Map 3d Atomic Structure of Brain Signaling Scientists have revealed never-before-seen details of how our brain sends rapid-fire messages between its cells.
#Nanofiber Hydrogel Infused with Snake Venom May Quickly Stop Bleeding A nanofiber hydrogel infused with snake venom may be the best material to stop bleeding quickly, according to Rice university scientists.
The Rice researchers combined batroxobin with their synthetic, self-assembling nanofibers, which can be loaded into a syringe
#Snake Venom-infused Hydrogel Stops Bleeding A nanofiber hydrogel infused with snake venom may be the best material to stop bleeding quickly, according to Rice university scientists.
The Rice researchers combined batroxobin with their synthetic, self-assembling nanofibers, which can be loaded into a syringe
#Snake venom helps hydrogels stop the bleeding A nanofiber hydrogel infused with snake venom may be the best material to stop bleeding quickly, according to Rice Univ. scientists.
The Rice researchers combined batroxobin with their synthetic, self-assembling nanofibers, which can be loaded into a syringe
even in presence of anticoagulants A nanofiber hydrogel infused with snake venom may be the best material to stop bleeding quickly, according to Rice university scientists.
The Rice researchers combined batroxobin with their synthetic, self-assembling nanofibers, which can be loaded into a syringe
#New Technique Increases Nanofiber Production Rate Fourfold Nanofibers polymer filaments only a couple of hundred nanometers in diameter have a huge range of potential applications, from solar cells
In the latest issue of the journal Nanotechnology, MIT researchers describe a new technique for producing nanofibers that increases the rate of production fourfold
efficient nanofiber production. e have demonstrated a systematic way to produce nanofibers through electrospinning that surpasses the state of the art,
where you would be able to individually control each emitter to print deposits of nanofibers.
Tangled tale Nanofibers are useful for any application that benefits from a high ratio of surface area to volume solar cells, for instance,
Nanofibers can also yield materials that are permeable only at very small scales, like water filters,
The standard technique for manufacturing nanofibers is called electrospinning, and it comes in two varieties. In the first, a polymer solution is pumped through a small nozzle,
from the school Bourns College of Engineering, involves a new paperlike material made from silicon in the form of spongy silicon nanofibers.
each silicon nanofiber is more than 100 times thinner than your hair. That why, although each fiber is spongelike,
The Bourns team resolved that problem by upcycling silicon into a mass of nanofibers enabling the battery to cycle hundreds of times without degrading.
Carbon Coated Silicon Nanofiber Paper via Mg Reduction of Electrospun Sio2 Nanofibers, published in Nature Scientific Reports.
#Inexpensive Technique Developed to Manufacture Nanofibers Scientists at the University of Georgia say they have developed an inexpensive way to manufacture nanofibers,
and safe means for producing large quantities of nanofibers that can be embedded with a multitude of materials,
Thousands of times thinner than the average human hair, nanofibers are used by medical researchers to create advanced wound dressings and for tissue regeneration
"The process we have developed makes it possible for almost anyone to manufacture high-quality nanofibers without the need for expensive equipment,
but it also makes it possible for more businesses and researchers to experiment with nanofibers without worrying too much about their budget."
"Currently, the most common nanofiber manufacturing technique, called electrospinning, uses high-voltage electricity and specially designed equipment to produce the polymer strings.
"In contrast to other nanofiber spinning devices, most of the equipment used in our device is said simple
"At laboratory scale, a v simple handcrafted setup is capable of producing spools containing hundreds of yards of nanofibers in a matter of seconds.
forming a nanofiber string that winds around the platter as it continues to spin. The device can spin at more than 1
000 revolutions per minute, enough time to create more than 50 kilometers (or about 31 miles) of ultra-thin nanofiber.
just as thin and just as strong as nanofibers created through other methods, "he said.""Plus, users don't have to worry about the safety issues of using high voltages or the complexity of other machines."
"The researchers can use this method to create a variety of nanofibers simply by changing the polymer placed in the syringe.
for example, create specially designed nanofibers that will promote the growth of stem cells. Fibers like these are used currently to create scaffolding for lab-grown tissues and organs.
Nanofibers can also be loaded with proteins, nanotubes, fluorescent materials and therapeutic agents.""We can use almost any kind of polymer with this platform,
and we can tailor make the nanofibers for different applications, "explained Dr. Minko.""It's like cooking.
the carbon nanofibers form a complex buckled structure, which allows for repeated stretching of the fiber. hink of the buckling that occurs
Nanofibers-polymer filaments only a couple of hundred nanometers in diameter have a huge range of potential applications, from solar cells to water filtration to fuel cells.
In the latest issue of the journal Nanotechnology, MIT researchers describe a new technique for producing nanofibers that increases the rate of production fourfold
efficient nanofiber production. e have demonstrated a systematic way to produce nanofibers through electrospinning that surpasses the state of the art,
where you would be able to individually control each emitter to print deposits of nanofibers. angled talenanofibers are useful for any application that benefits from a high ratio of surface area to volume solar cells, for instance,
Nanofibers can also yield materials that are permeable only at very small scales, like water filters,
The standard technique for manufacturing nanofibers is called electrospinning, and it comes in two varieties. In the first
Nanofibers-polymer filaments only a couple of hundred nanometers in diameter have a huge range of potential applications, from solar cells to water filtration to fuel cells.
In the latest issue of the journal Nanotechnology, MIT researchers describe a new technique for producing nanofibers that increases the rate of production fourfold
efficient nanofiber production. e have demonstrated a systematic way to produce nanofibers through electrospinning that surpasses the state of the art,
where you would be able to individually control each emitter to print deposits of nanofibers. angled talenanofibers are useful for any application that benefits from a high ratio of surface area to volume solar cells, for instance,
Nanofibers can also yield materials that are permeable only at very small scales, like water filters,
The standard technique for manufacturing nanofibers is called electrospinning, and it comes in two varieties. In the first
#NC State researchers create'nanofiber gusher':'Report method of fabricating larger amounts of nanofibers in liquid A simple process for batch
or continuous formation of polymer nanofibers and other nanomaterials in the bulk of a sheared fluid medium is introduced.
The process could be of high value to commercial nanotechnology as it can be scaled easily up to the fabrication of staple nanofibers at rates that could exceed tens of kilograms per hour.
Creating large amounts of polymer nanofibers dispersed in liquid is a challenge that has vexed researchers for years.
But engineers and researchers at North carolina State university and one of its start-up companies have reported now a method that can produce unprecedented amounts of polymer nanofibers
which have potential applications in filtration, batteries and cell scaffolding. In a paper published online in Advanced Materials,
describe the method that allows them to fabricate polymer nanofibers on a massive scale. The method-fine-tuned after nearly a decade of increasing success in producing micro
you find a mat of nanofibers wrapped around it. When they first started investigating the liquid shearing process,
but you really want nanofibers, "Velev said.""We achieved this during the scaling up and commercialization of the technology."
They worked with the experienced entrepreneur Miles Wright to start a company called Xanofi to advance the quest for nanofibers
"We can now create kilograms of nanofibers per hour using this simple continuous flow process,
which when scaled up becomes a'nanofiber gusher, '"Velev said.""Depending on the concentrations of liquids, polymers and antisolvents,
"When we produce the nanofibers via continuous flow, we get exactly the same nanofibers you would get
if you were producing small quantities of them. The fabrication of these materials in liquid is advantageous
because you can create truly three-dimensional nanofiber substrates with very, very high overall surface area. This leads to many enhanced products ranging from filters to cell scaffolds, printable bioinks, battery separators, plus many more."#
2015announcements NC State researchers create'nanofiber gusher':'Report method of fabricating larger amounts of nanofibers in liquid March 19th,
2015new optical materials break digital connectivity barriers: Tel aviv University researcher discovers novel nanoscale'metamaterial'could serve as future ultra-high-speed computing units March 19th, 2015an improved method for coating gold nanorods March 19th,
That's how modern chemistry bonds nanoparticles to a substrate March 19th, 2015nc State researchers create'nanofiber gusher':
'Report method of fabricating larger amounts of nanofibers in liquid March 19th, 2015new optical materials break digital connectivity barriers:
#Researchers develop new way to manufacture nanofibers Abstract: Researchers at the University of Georgia have developed an inexpensive way to manufacture extraordinarily thin polymer strings commonly known as nanofibers.
These polymers can be made from natural materials like proteins or from human-made substances to make plastic,
scalable and safe means for producing very large quantities of nanofibers that can be embedded with a multitude of materials,
Many thousands of times thinner than the average human hair, nanofibers are used by medical researchers to create advanced wound dressings--and for tissue regeneration
"The process we have developed makes it possible for almost anyone to manufacture high-quality nanofibers without the need for expensive equipment,
but it also makes it possible for more businesses and researchers to experiment with nanofibers without worrying too much about their budget."
"Currently, the most common nanofiber manufacturing technique--electrospinning--uses high-voltage electricity and specially designed equipment to produce the polymer strings.
"In contrast to other nanofiber spinning devices, most of the equipment used in our device is very simple,
"At laboratory scale, a very simple handcrafted setup is capable of producing spools containing hundreds of yards of nanofibers in a matter of seconds.
forming a nanofiber string that winds around the platter as it continues to spin. The device can spin at more than 1
000 revolutions per minute, enough time to create more than 50 kilometers--or about 31 miles--of ultra-thin nanofiber.
just as thin and just as strong as nanofibers created through other methods, "he said.""Plus, users don't have to worry about the safety issues of using high voltages or the complexity of other machines."
"The researchers can use this method to create a variety of nanofibers simply by changing the polymer placed in the syringe.
for example, create specially designed nanofibers that will promote the growth of stem cells. Fibers like these are used currently to create scaffolding for lab-grown tissues and organs.
Nanofibers can also be loaded with proteins, nanotubes, fluorescent materials and therapeutic agents.""We can use almost any kind of polymer with this platform,
and we can tailor make the nanofibers for different applications, "Minko said.""It's like cooking.
2015tappi Announces 2015 Nanotechnology Division Technical Award Winner June 6th, 2015unlocking nanofibers potential: Prototype boosts production of versatile fibers fourfold,
Hydrogels block harmful oxygen June 15th, 2015nist's'nano-raspberries'could bear fruit in fuel cells June 9th, 2015unlocking nanofibers potential:
the carbon nanofibers form a complex buckled structure, which allows for repeated stretching of the fiber."
For more information, visit www1. lehigh. edu. Harsh Environments No Match for New Fiber Sensor Nanofiber Fabrication Boosts Quantum computing Sulfur Copolymers Boost IR Optics
Made with nanofibers extracted from Kevlar, the tough material in bulletproof vests, the barrier stifles the growth of metal tendrils that can become unwanted pathways for electrical current.
The study,"A dendrite-suppressing solid ion conductor from aramid nanofibers, "will appear online Jan 27 in Nature Communications.
the carbon nanofibers form a complex buckled structure, which allows for repeated stretching of the fiber. hink of the buckling that occurs
< Back - Next >
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011