| Garnet (1) |  |
| Graphite (19) | |
| Gypsum (2) | |
| Mineral (17) | |
| Perovskite (24) | |
| Quartz (12) | |
| Zeolite (15) | |
Panasonic has found a way to bind the Tio2 to another particle zeolite (a commercial adsorbent and catalyst)
When the novel photocatalytic particles are stirred Tio2 is released from the zeolite and dispersed throughout the water.
If the water is left still it will cause Tio2 to bind to zeolite again making it easy to separate
According to co-author Professor Bert Sels of hape-selective zeolite catalysis for bioplastics productionthe production process for PLA is expensive because of the intermediary steps."
"We speed up and guide the chemical process in the reactor with a zeolite as a catalyst,
we were able to convert lactic acid directly into the building blocks for PLA without making the larger by-products that do not fit into the zeolite pores. ur new method has compared several advantages to the traditional technique:
"Shape-selective zeolite catalysis for bioplastics production"Author (s: Michiel Dusselier, Pieter Van Woude, Annelies Dewaele, Pierre Jacobs,
The prototype developed in the Research Department in Zeolites, at the Institute of Science of the Meritorious University of Puebla (BUAP), in center Mexico,
Methanol is used as a refrigerant and as zeolite (mineral) as an adsorbent. Toledo Flores says the system has two stages, during the day"warming,
Solar energy heats the zeolite and increases the methanol vapor pressure, the refrigerant is condensed and stored in a tank flowing to the evaporator."
and is adsorbed again by zeolite generating cooling temperatures of five degrees Celsius. The adsorption process continues all night until morning."
thereby knows how many zeolite to use. She also considers the room temperature, in this case of 20 degrees Celsius.
"We speed up and guide the chemical process in the reactor with a zeolite as a catalyst.
Zeolites are porous minerals. By selecting a specific type on the basis of its pore shape,
we were able to convert lactic acid directly into the building blocks for PLA without making the larger by-products that do not fit into the zeolite pores.
< Back - Next >
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011