This method is analogous to half-toning used in ink-based printing and results in a broad color gamut comments Yang.
Researchers use aluminum nanostructures for photorealistic printing of plasmonic color palettes More information: Tan S. J. Zhang L. Zhu D. Goh X. M. Wang Y. M. et al.
Plasmonic color palettes for photorealistic printing with aluminum nanostructures. Nano Letters 14 4023#4029 (2014.
#High-resolution patterns of quantum dots with e-jet printing A team of 17 materials science and engineering researchers from the University of Illinois at Urbana#Champaign and Erciyes University in Turkey have authored High-resolution Patterns of Quantum dots
Are formed by Electrohydrodynamic Jet Printing for Light-emitting diodes. Their paper was published in Nano Letters an ACS journal.
and operating conditions that allow for high-resolution printing of layers of quantum dots with precise control over thickness and submicron lateral resolution and capabilities for use as active layers of QD light-emitting diodes.
The thickness can be controlled through a combination of printing parameters including the size of the nozzle the stage speed ink composition and voltage bias.
Their work on high-resolution patterns of quantum dots is of interest as it shows that advanced techniques in e-jet printing offer powerful capabilities in patterning quantum dot materials from solution inks over large areas.
E-jet printing refers to a technique called electrohydrodynamic jet described as a micro/nanomanufacturing process that uses an electric field to induce fluid jet printing through micro/nanoscale nozzles.
The resolution of conventional ink jet-printers printers is limited. For the past seven years she said Rogers has been developing the electrohydrodynamic jet printing method.
This kind of printer works by pulling ink droplets out of the nozzle rather than pushing them allowing for smaller droplets.
An electric field at the nozzle opening causes ions to form on the meniscus of the ink droplet.
Then a tiny droplet shears off and lands on the printing surface. A computer program controls the printer by directing the movement of the substrate
and varying the voltage at the nozzle to print a given pattern. Dot line square and complex images as QD patterns are possible the researchers said with tunable dimensions and thickness.
They wrote that these arrays as well as those constructed with multiple different QD materials directly patterned/stacked by e-jet printing can be utilized as photoluminescent and electroluminescent layers.
In the IEEE story headlined High-resolution Printing of Quantum dots For Vibrant Inexpensive Displays Patel said these researchers repurposed a printing method which they devised for other applications.
Inkjet printers usually have a few hundred nozzles said Patel. The difficulty with the e-jet printing method is that the electric field at one nozzle affects the fields of neighboring nozzles.
They are trying to figure out how to isolate nozzles in order to eliminate that crosstalk. Explore further:
High-resolution Patterns of Quantum dots Formed by Electrohydrodynamic Jet Printing for Light-emitting diodes Nano Lett. Article ASAP.
and operating conditions that allow for high-resolution printing of layers of quantum dots (QDS) with precise control over thickness and submicron lateral resolution and capabilities for use as active layers of QD light-emitting diodes (LEDS).
The shapes and thicknesses of the QD patterns exhibit systematic dependence on the dimensions of the printing nozzle and the ink composition in ways that allow nearly arbitrary systematic control when exploited in a fully automated printing tool.
Sequential printing of different types of QDS in a multilayer stack or in an interdigitated geometry provides strategies for continuous tuning of the effective overall emission wavelengths of the resulting QD LEDS.
and active electronics via 3-D printing (Phys. org) As part of a project demonstrating new 3-D printing techniques Princeton researchers have embedded tiny light-emitting diodes into a standard contact lens
Kong the lead author of the Oct 31 article describing the current work in the journal Nano Letters said that the contact lens project on the other hand involved the printing of active electronics using diverse materials.
Mcalpine said that one of 3-D printing's greatest strengths is its ability to create electronics in complex forms.
and then stacks them into three dimensions 3-D printers can create vertical structures as easily as horizontal ones.
To conduct the research the team built a new type of 3-D printer that Mcalpine described as somewhere between off-the-shelf and really fancy.
and build the new printer which Mcalpine estimated cost in the neighborhood of $20000. Mcalpine said that he does not envision 3-D printing replacing traditional manufacturing in electronics any time soon;
instead they are complementary technologies with very different strengths. Traditional manufacturing which uses lithography to create electronic components is a fast and efficient way to make multiple copies with a very high reliability.
Manufacturers are using 3-D printing which is slow but easy to change and customize to create molds and patterns for rapid prototyping.
Trying to print a cellphone is probably not the way to go Mcalpine said It is customization that gives the power to 3-D printing.
In this case the researchers were able to custom 3-D print electronics on a contact lens by first scanning the lens and feeding the geometric information back into the printer.
The new technique could also be used to create nanoscale inkjet printers for printing electronics or biological cells or to create antennas or photonic components.
Scientists have developed now a fast low-cost way of making these sensors by directly printing conductive ink on paper.
In my opinion the best nanosystems are going to be done by 3-D printing because it would bypass the problems of standard microfabrication Velsquez-Garca says.
3-D printing is going to make a big difference in the kinds of systems we can put together
Researchers use aluminum nanostructures for photorealistic printing of plasmonic color palettes More information: Zheng B. Y. Wang Y. Nordlander P. and Halas N. J. 2014) Color-Selective and CMOS-Compatible Photodetection Based on Aluminum Plasmonics.
which offer the possibility of mass production by using the conventional printing technology and working with low-cost materials.
It was made by inkjet printing of an organic field-effect transistor (OFET) and subsequent functionalization of the insulator with specific antibodies.
The Biofet designed at ICN2 represents an important starting point for the design and fabrication of flexible organic biosensing devices by inkjet printing.
Formation of organic thin-film transistors through room-temperature printing More information: Mariana Medina-Sánchez Carme Martínez-Domingo Eloi Ramon Arben Merkoçi.
Everybody with a printer at home will be able to print their own artificial eye and physically stick it to a flexible mobile phone Felice said.
and can be printed by a standard inkjet printer. The graphene-based ink enables cost-effective printed electronics on plastic.
and does not require much processing after printing. We used a simple sonication and centrifugation process to unveil graphene potential in inks
uses 3-D printing technology that can be implemented now i
#New approach may be key to quantum dot solar cells with real gains in efficiency (Phys. org) Los alamos researchers have demonstrated an almost fourfold boost of the carrier multiplication yield with nanoengineered quantum dots.
#Liver-like device via 3-D printer (Phys. org) Nanoengineers at the University of California San diego have developed a 3-D-printed device inspired by the liver to remove dangerous toxins
or 3-D painting#(you know like printing) could also be used to make entirely new parts.
A 3-D Printer Made From E waste#The circle of electronic life: useless printer scraps become a way to print scraps of other things!
Resourceful 33-year-old inventor Kodjo Afate Gnikou of the West african country Togo has created a cheap DIY 3-D printer out of electronic waste scavenged from junk yards.
Gnikou is part of Woelab a hackerspace in the city of Lomã as well as a geographer and an occasional maintenance technician according to a crowd funding page for his project.
All together the printer ended up costing him about $100 a far cry from the hundreds or thousands of dollars you'd shell out to buy one.
He and his printer system are#part of this year's NASA International Space Apps Challenge in Paris proposing to use e waste to make 3-D printers that would print tools to colonize Mars. euronews
#Watch A 3-D Printer Make A Pizza#This summer we heard about a 3-D printer for food developed with NASA funding
Now#lo and behold the printer has shown up at SXSW Eco and we caught a short demonstration from the makers a group from#Systems and Materials Research Corporation.
The printer#served up a pie made with dough#ketchup and cream cheese(?.The printer is still in its earliest stages so the creators haven't quite perfected the process.
Instead of making a classic slice they're showing off the proper levels of pizza viscosity with similar ingredients:
the printer lays down a layer of dough from a stock of simple non-perishable ingredients then layers the sauce (ketchup) and cheese (cream cheese) on top.
send up a printer instead of boxes of food and you save space plus you give the astronauts a home-cooked meal.
Here you can see the printer laying down the cheese layer and one of the printer technicians being directed to add more pressure.
Yum p
#An Open-source Hive To Save The Bees#You may have heard by now: bees are dropping like flies continuing to die at unprecedented rates
And instead of being made of plastic (3-D printing's go-to material) it's printed from sand.
and in April 2013 the Mayo Clinic used a 3-D printer to create a customized artificial hip.
if the timing is correct the braking energy of one axis can be used as energy for another in the same way as a regenerative braking system reducing energy usage. his system is used currently in the automotive chip-making printing and food industries.
Moving forward with 4-D printing Another active area of investigation for the lab is-D printing,
After demonstrating the 4-D printing concept, the lab soon found itself pursuing a number of intriguing applications with several companies.
Commercializing collaborations Self-Assembly Lab researchers may have certain applications in mind as they develop new concepts such as 4-D printing.
Simultaneously, the cost of 3-D printers has fallen sufficiently to make them household consumer items.
Now a team of MIT researchers has opened up a new frontier in 3-D printing:
Like other 3-D printers now on the market, the device can print designs created in a computer-assisted design program,
far higher than the temperatures used for other 3-D printing. The stream of glowing molten glass from the nozzle resembles honey as it coils onto a platform,
Klein says the printing system is an example of multidisciplinary work facilitated by MIT flexible departmental boundaries in this case
Simultaneously, the cost of 3-D printers has fallen sufficiently to make them household consumer items.
Now a team of MIT researchers has opened up a new frontier in 3-D printing:
Like other 3-D printers now on the market, the device can print designs created in a computer-assisted design program,
far higher than the temperatures used for other 3-D printing. The stream of glowing molten glass from the nozzle resembles honey as it coils onto a platform,
Klein says the printing system is an example of multidisciplinary work facilitated by MIT flexible departmental boundaries in this case
#3-D Printing Software Turns Heart Scans into Surgical Models A new 3-D printing system can transform medical scans of a patient heart into a physical models that help
the printed cells offer the potential to allow printing onto actual housing materials including glass
the acetabular cup is manufactured by the most advanced 3d metal printing technology. In the past, the cup was made through titanium alloy casting,
in the future custom printing will ensure a perfect fit. So far, dozens of patients have received 3d printed hip replacement surgery,
"A'wall wind'of stacked Microcubes3d printing technology, provided with the support of 3d Systemscloud-based manufacturing service Quickparts, played a major role in helping Yost realize this project.
Quickparts utilized 3d System SLS printing technology and three different materials: Duraform polyamide (PA), Duraform glass-filled (GF),
instead uses active mixing and fast-switching nozzles, allowing for the printing of concentrated viscoelastic inks and the simultaneous control of composition and geometry during printing.
The team took advantage of 3d printing instant feedback and rapid prototyping to experiment with new shapes, printing speeds, battery technologies, cleaner burning fuels,
Because of the sharing-function of the app, the OLO is also being touted as the first ocial3d printer. he idea behind the development of OLO was to create a cheap 3d printer that anyone could easily use,
Despite more and more ser-friendly3d printers and 3d printing services hitting the market, the truth is that most people either do not understand the technology,
and battery power source (standard AA 1. 5v that last for at least 100 printings), it is also ideal for anyone who is traveling
the app will make the screen light up in a pattern specific to the object you are printing.
D printing Mushtari is a wonderful example of how far this collaboration can bring us.
The microfish were manufactured with microscale continuous optical printing (COP), an advanced, high-resolution form of 3d printing that was created in Chen laboratory.
The COP printer functions at a rapid pace, and is able to produce hundreds of their microfish within seconds of printing.
What makes this printer so efficient is its digital micromirroring array device chip (DMD), containing millions of micromirrors that function separately from one another to cast the desired microfish design onto photosensitive material,
which is solidified then once exposed to UV LIGHT. This advanced process results in these 3d printed microfish, able to swim naturally through liquids,
since a egacy3d printer can still inspire advanced research studies and projects. The ultimate goal of Dr. Wong study is to demonstrate the technical feasibility of powering an FFF 3d printer using solar energy to manufacture functional
e built the implant using our $1. 3 million Arcam printer. The printer works by directing an electron beam at a bed of titanium powder
in order to melt it. This process is repeated then building the product up layer-by-layer until you have a complete implant. 3d printing has significant advantages over traditional manufacturing methods, particularly for biomedical applications.
and printer right at the hospital to create custom nerve guides right on site to restore nerve function.
A model of the modified Leapfrog Printer used in production. 4d printing can be defined as the combined use of advanced 3d printing technology and the change of form over time.
#Freedee Printing Solutions Launches Hungary First 3d Academy 3d Academy may be one of the top trends in European 3d printing lately.
one of them is Freedee Printing Solutions, one of Hungary first 3d printing and 3d scanning service and retailer.
Previously, printing techniques have been applied to integrate electronics into plastic labels only, but with the VTT methods it is now also possible to produce more environmentally friendly paper-based security tags.
electronic circuits and sensors can be integrated directly into different materials by printing, thus producing novel security tags for sealing shipments
In the ROPAS project, VTT showed that roll-to-roll technology for printing electronics is suited also to the manufacturing of paper-based security tags.
It would mean that medical institutions could adjust the dose for individual patients with just a simple tweak to the software before printing.
printers are adapted to produce pharmaceutical compounds rather than polymers which are used more usually. Such methods are already proving very useful in healthcare with doctors using the system to create customised implants for patients with injuries or other conditions.
She compared them to retail 3-D printers which have proliferated in recent years, bringing that once-rare technology to more of a mass market. e could allow all kinds of labs to do this research.
like a 3-D printer at the molecular level. The automated process has the potential to greatly speed up
The tool they used to help make that difficult decision--3-D printing. Using a specialized MRI of the fetus in the womb
doctors were able to use a 3-D printer to print models of the fetus face,
"This is the first case we are aware of that 3-D printing has helped show how severe an airway risk in a fetus was
. of the U-M division of Otolaryngology-Head and Neck Surgery. 3-D printing has had many medical applications.
#New graphene based inks for high-speed manufacturing of printed electronics A low-cost, high-speed method for printing graphene inks using a conventional roll-to-roll printing process,
the first time that graphene has been used for printing on a large-scale commercial printing press at high speed.
"Being able to produce conductive inks that could effortlessly be used for printing at a commercial scale at a very high speed will open up all kinds of different applications for graphene and other similar materials.""
which is in line with commercial production rates for graphics printing, and far faster than earlier prototypes.
it could also initiate entirely new business opportunities for commercial graphics printers, who could diversify into the electronics sector."
and the Cambridge area in particular, has always been strong in the printing sector, but mostly for graphics printing and packaging,"said Hasan, a Royal Academy of Engineering Research Fellow and a University Lecturer in the Engineering Department."
"We hope to use this strong local expertise to expand our functional ink platform. In addition to cheaper printable electronics, this technology opens up potential application areas such as smart packaging and disposable sensors,
especially in printing highly viscous and sticky biological and polymeric materials where friction and contamination are major obstacles.
#Carnegie mellon researchers hack off-the-shelf 3-D printer towards rebuilding the heart As of this month, over 4,
"Traditional 3-D printers build hard objects typically made of plastic or metal, and they work by depositing material onto a surface layer-by-layer to create the 3-D object.
Printing each layer requires sturdy support from the layers below, so printing with soft materials like gels has been limited."
"3-D printing of various materials has been a common trend in tissue engineering in the last decade,
but until now, no one had developed a method for assembling common tissue engineering gels like collagen or fibrin,"said TJ Hinton,
however, has been able to implement their technique on a range of consumer-level 3-D printers,
what we're printing, "Feinberg said.""It has enabled really us to accelerate development of new materials
And we are also contributing back by releasing our 3-D printer designs under an open-source license
this bioprinter can finish a 10-centimeter blood vessel within two minutes. he core of the printer is the Biobrick,
Printing multiple materials with different dynamic mechanical properties in prescribed patterns throughout the 3d object enables the ability to create objects that change shape in a controlled sequence over time.
and Design Centre. e are now extending this concept of digital SMPS to enable printing of SMPS with dynamic mechanical properties that vary continuously in 3d space.
#Inkjet printers could produce paper sensors that identify dangerous food and water contaminants Sensors that identify infectious disease
and food contaminants may soon be printed on paper using ordinary office inkjet printers. Researchers at Mcmaster University have developed a prototype that could lead to a commercial product in the next few years which helps doctors
In 2012 they used specialized inkjet printers to produce paper strips that change color in the presence of E coli.
"Our original E coli sensor required a very sophisticated ink jet-printer printer and very specialized inks in order to be produced,
and a basic office printer to produce the test strips, meaning that it should be much easier to scale up and manufacture."
Now, the company is working on a printer that will work outside the station, in the cold vacuum of actual outer space.
and printer right at the hospital to create custom nerve guides right on site to restore nerve function."
of which is engineering personalized tissue in this case, printing a personalized nerve scaffold for your post-injury healing.
This printing technology takes a slightly different approach: After 3d scanning a rat sciatic nerve, the researchers used a custom-built 3d printer to make silicone guides for nerve regeneration.
and printer right at the hospital to create custom nerve guides right on site to restore nerve function. n
-D printing of various materials has been a common trend in tissue engineering in the last decade,
After the printing had concluded, the support gel could then be melted away by heating it to body temperature (37°C,
in this growing field of science, most of these printers cost over $100, 000 (roughly £65, 000) and require a specialist team of operators to use.
The drug is manufactured using a three-dimensional printer which creates a porous formulation that helps bioavailability and patient uptake,
. an innovative Japanese biomedical 3d printing company, has created a 3d bone printer capable of producing artificial bone structures for humans.
and can be printed using an inkjet printer. Shimizu stressed that it is tough to have both features at the same time,
it usually clogs the heads of the printer ink cartridge. But Agic he said, has succeeded in preventing this.
Three-dimensional printers can create items from a wide variety of materials: plastic, ceramic, glass, metal and even more unusual ingredients such as living cells.
just as ordinary printers lay down ink, except 3d printers can also lay down flat layers on top of each other to build 3d objects.
#3d Tissue Printing Using a DNA Guidance System Researchers at UCSF have developed a method called DNA Programmed Assembly of Cells (DPAC) that brings us one step closer to being able to print fully functional living organs.
DNA-Guided 3-D Printing of Human Tissue is Unveile s
#Brain-Machine Interface Learns to Control Robot Arm Based on User Error Brain signals Brain-machine interfaces (BMIS) restore
high-performance electronics and new 3-D printing technologies,"says Benjamin J. Leever, Ph d, . who is at the Air force Research Laboratory at Wright-Patterson Air force base."
which is similar in scope to 3-D printing but different in that material is removed instead of added.
#Revolutionary 3-D printing technology uses continuous liquid interface production (w/video) A 3d printing technology developed by Silicon valley startup,
The same bonding that makes the molecules soluble for printing fabrication processes also leaves them prone to low melting points,
They then used electrohydrodynamic jet (e-jet) printing technology to precisely print the QD-embedded polymers onto photonic crystal structures.
and printer right at the hospital to create custom nerve guides right on site to restore nerve function."
#New frontiers in 3d printing Three dimensional printing is revolutionizing the production of new devices and structures, including soft robots,
for the first time, allow for the simultaneous control of composition and geometry during printing. Lewis is a Core Faculty member at the Wyss Institute for Biologically Inspired Engineering at Harvard university and the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard John A. Paulson School of engineering and Applied sciences (SEAS.
The goal of integrating different material and structural properties within printed objects has demanded the invention of new, flexible printing platforms.
Unlike most 3-D printing, this technique does not require photoinitiators, compounds that promote photoreactivity
which is similar in scope to 3-D printing but different in that material is removed instead of added.
especially in printing highly viscous and sticky biological and polymeric materials where friction and contamination are major obstacles.
#Researchers create transplantation model for 3-D printed constructs Using sugar, silicone and a 3-D printer,
Bioengineering graduate student Samantha Paulsen and research technician Anderson Ta worked together to develop a proof-of-concept construct--a small silicone gel about the size of a small candy gummy bear--using 3-D printing.
Using an open-source 3-D printer that lays down individual filaments of sugar glass one layer at a time
Professor Wallace said. his paves the way for the use of more sophisticated printers to create structures with much finer resolution. 3d printing of layered brain-like structures using peptide modified gellan gum substrates
The facile ability to form discrete cell-containing layers validates the application of this novel printing technique to form complex, layered and viable 3d cell structures.
The Ohio-based company says its printing system can package potent drug doses of up to 1, 000 milligrams into individual tablets.
Google also invented a new typeface called roduct Sansthat is meant to resemble the simple printing in a grade-school book.
It works like a scaffold, allowing the printing of intricate patterns that would collapse without its support such as nested Russian-doll-like structures and thin
Printing into supportive gel gets around that challenge preventing the creations from sagging or buckling before they solidify.
#Your Pill Is Printing: FDA Approves First 3-D-Printed Drug In a first, the Food and Drug Administration has given approval to a drug that is produced on a 3-D printer.
The pill, produced by Aprecia Pharmaceuticals, treats seizures. It's expected to hit the market in the first quarter of 2016.
"The new tablets are manufactured using 3-D printing, which creates objects by very precisely spewing out one layer of a substance on top of another. 3-D printing is being used to make all sorts of things these days."
"The FDA had approved previously medical devices made with 3-D printing. The company that makes Spritam says the 3-D-printed version of the drug allows it to dissolve more quickly,
which makes it easier to swallow.""Another benefit of the process, says Aprecia, the drug's maker, is that it allows a high drug load up to 1,
Aprecia says it based its printing platform on technology that originated at the Massachusetts institute of technology o
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011