electronic device

Electronic device

Amplifier (40)
Antenna (270)
Circuits (1435)
Consumer electronics (474)
Electrical connectors (8)
Electrode (1090)
Electronic converters (51)
Electronic device (277)
Electronic equipment (61)
Electronic skin (34)
Logic gate (59)
Microchip (210)
Modem (6)
Multiplexer (10)
Receiver (138)
Sensor (3062)
Transceiver (19)
Transmitter (109)

Like any electronic device, sensors need energy to operate. Until now this has largely been solved by hooking them up to the grid

This platform uses oll-to-roll manufacturingwhich is the process of creating electronic devices on a roll of plastic or foil.

and flexible electronic devices to harvest solar energysays Luyao Lu a graduate student in chemistry and lead author of a paper in the journal Nature Photonics that describes the result.

They expect the finding to be important to manufacturers considering the use of graphene in electronic devices.

transparent flexible displays for electronic devices; special filters for water purification; new types of sensors; and computer memory.

hat hath God wrought. reating a market for printed electronic devices Lipson says could be like introducing color printers after only black and white had existed. t opens up a whole new space that makes the old look primitive. ource:

The device wirelessly converts the microwave signal to direct current voltage capable of recharging a cell phone battery or other small electronic device according to a report appearing in Applied Physics Letters.

By comparison Universal serial bus (USB) chargers for small electronic devices provide about 5v of power. e were aiming for the highest energy efficiency we could achievesays Hawkes. e had been getting energy efficiency around 6 to 10 percent

and electronic devices when it is used as a reference. good tuning fork controls the release of its acoustical energy ringing just one pitch at a particular sound frequency for a long timeâ##a sustaining property called the quality factor.

Eventually oscillators in high-performance electronics systems while outwardly appearing to be electronic devices will internally be purely opticalvahala says. he technology that Kerry

Here is the proof. xperts say the achievement will galvanize efforts to find successors to silicon chips which could soon encounter physical limits that might prevent them from delivering smaller faster cheaper electronic devices. arbon nanotubes CNTS have long been considered as a potential successor to the silicon transistorsays Professor

Commercial applications in small electronic devices solar cells batteries and even medical devices are just around the corner.

Helplines and women refuge charities have reported a dramatic rise in the use of spyware apps to eavesdrop on the victims of domestic violence via their mobiles and other electronic devices,

or harassed using electronic devices. A second study this year by the Digital Trust, which helps victims of online stalking,

and electronic devices are definitely in the cards. And that is not all. For when heated, vanadium dioxide s crystals begin to rapidly contract along one dimension,

In recent weeks, Intel and Hon hai/Foxconn, seeing wireless charging as a possible killer app for electronic devices such as laptops

And in that regard, Vessyl as it is now a $199 glowing electronic device that you wash by hand and charge on a bundled coaster (for five to seven days of run time) will probably only make sense to a small pool of early adopters.

The researchers also found that the new semimetal material exists in a sturdy 3d form that should be much easier to shape into electronic devices such as very fast transistors, sensors and transparent electrodes.

for backing up renewable power sites, for electronic devices and for industry and defense. Via World Future Society Share Thissubscribedel. icio. usfacebookredditstumbleupontechnorat o

says co-author Ido Bachelet of the Institute of Nanotechnology and Advanced Materials at Bar Ilan University. nlike electronic devices,

The technology opens the door to any number of mobile electronic devices which have so far been held back by limited battery lives. he idea of eliminating cables would allow us to redesign things in ways that we haven yet thought of,

The MIDAS Library also makes it simple for engineers to deal with intelligent electronic devices (IEDS) for protection and control of the electrical system.

or electronic device without obstructing the view. It's possible, thanks to Michigan State university researchers who have developed a completely transparent solar concentrator, reports Phys. org.

Electronic devices can also be made more waterproof than ever before and touchscreens could be made that resist finger grease and other similar causes of smudges.

Google wants to put the chip into small electronic devices like smartwatches, along with everyday objects. The release date for the API to Soli has not yet been announced yet. via Business Inside n

Brain-Zapping Implant Could Aid Injured Soldiers The authors of the paper say next step is to use the mesh system to deliver living stem cells that may help repair damaged sections of the brain or perhaps a multifunction electronic device

on implementing quantum dots into electronic devices. In a study funded by MIT Deshpande Center for Technological Innovation, Coe-Sullivan, QD Vision cofounder Jonathan Steckel Phd 6,

Now the same team has demonstrated that this process can generate small amounts of electricity that might be used to power electronic devices.

or other sources of ambient energy and represents an amount that could be sufficient to provide useful power for electronic devices in some remote locations.

which can be used to power microelectromechanical devices and small electronic devices. He adds Getting power from a condensation process is definitely a novel idea as condensation is used mainly for thermal management.#

We expect to have much more of these embedded electronic devices in people over the next decade or so t

and routing device that plugs into solar panels to power electronic devices, enabling a pay-as-you-go electricity system for people off the grid.

The researchers are also working on incorporating electronic devices into plants. he potential is really endless Strano says.

It might be a job for efficient spray cooling f we can figure out how to fit a system into the small space inside electronic devices.

#Tiny wires could provide a big energy boost Wearable electronic devices for health and fitness monitoring are a rapidly growing area of consumer electronics;

At the moment, the coin-sized batteries used in many small electronic devices have limited very ability to deliver a lot of power at once,

The junctions between p-and n-type semiconductors are the building blocks of electronic devices. Put together in sequence these p-n junctions form transistors which can in turn be combined into integrated circuits microchips and processors.

These properties can lead to new electronic devices that are more robust and multifunctional. The finding has the potential to increase graphene's use in computers as in computer chips that use electronic spin to store data.

This forms the foundation of an electronic device. However, researchers have struggled to isolate purely semiconducting carbon nanotubes,

The high temperature processes essential for high performance electronic devices have restricted severely the development of flexible electronics because of the fundamental thermal instabilities of polymer materials.

and then fabricating ultrathin inorganic electronic devices e g. high density crossbar memristive memory on top of the exfoliation layer.

on implementing quantum dots into electronic devices. In a study funded by MIT Deshpande Center for Technological Innovation, Coe-Sullivan, QD Vision cofounder Jonathan Steckel Phd 6,

. I did research on conducting plastics for electronic devices. When I moved into the cancer treatments with nanotechnology that's when my mum became really excited about my work.

or even inside electronic devices to help move heat away from heat generating chips. The team next plans to work on creating models that have more detail and

#Flexible paper electrodes with ultra-high loading for lithium-sulfur batteries With the rapid development of portable electronic devices, electric automobiles,

high energy densities for future flexible electronic devices such as smart electronics and roll up displays. y

#New self-assembly method for fabricating graphene nanoribbons First characterized in 2004 graphene is a two-dimensional material with extraordinary properties.

has taken a major step in developing long-sought polymer architecture to boost power-conversion efficiency of light to electricity for use in electronic devices.

and could replace existing touchscreen technologies in electronic devices. Even though this material is cheaper and easier to produce it does not compromise on performance.

Mixing silicon with other materials improves the diversity of nanoscale electronic devices More information: Oda K. Nanai Y. Sato T. Kimura S. & Okuno T. Correlation between photoluminescence and structure in silicon nanowires fabricated by metal-assisted etching.

it would be easy to integrate them into existing electronic devices and fabrication methods. The discovery, published in Nature Communications,

but in principle it's highly compatible with traditional electronic devices.""Quantum materials Unlike silicon, samarium nickelate and other correlated oxides are quantum materials,

aim to develop an entirely new class of quantum electronic devices and systems that will transform signal processing and computation.

To test picene's properties when juxtaposed with a metal as it would be in an electronic device the researchers deposited a single layer of picene molecules onto a piece of silver.

It is expected highly that the N-ACNT/G sandwiches hold various potential applications in the area of nanocomposite energy storage environmental protection electronic device as well as healthcare because of their robust hierarchical structure 3d electron transfer

an advancement that could enable electronic devices to function with very little energy. The process involves passing electrons through a quantum well to cool them

these research findings could potentially reduce energy consumption of electronic devices by more than 10 times compared to the present technology,

"Personal electronic devices such as smart phones, ipads, etc. can last much longer before recharging.""In addition to potential commercial applications, there are many military uses for the technology.

This facilitates their application in transistors and other electronic devices because unlike graphene, their electrical conductance can be switched off."

They can be used in rubberlike electronic devices that, unlike paperlike electronic devices, can stretch as well as bend. They can also be attached to topologically complex curved surfaces,

serving as real skin-like sensing devices, Associate professor Cheng said. In their report, published recently in ACS Nano,

In addition this research has the potential to inform the creation of living microbial circuits forming the foundation of hybrid biological-synthetic electronic devices.

and others at the University of Massachusetts Amherst today report a breakthrough technique for controlling molecular assembly of nanoparticles over multiple length scales that should allow faster cheaper more ecologically friendly manufacture of organic photovoltaics and other electronic devices.

The new method should reduce the time nano manufacturing firms spend in trial-and-error searches for materials to make electronic devices such as solar cells organic transistors and organic light-emitting diodes.

and form the basis of countless electronic devices such as memory chips photovoltaic cells logic gates and sensors. An interesting alternative to inorganic TFTS (silicon) is organic TFTS (OTFTS)

Lithium ion batteries are the rechargeable battery of choice for portable electronic devices and electric vehicles. But they present problems.

Cell phones and other portable electronic devices could use less power and last longer on a charge.

and development of electrical vehicles, space-launch vehicles and portable electronic devices. By being able to store

It is possible to further miniaturize the electronic devices or the space that has been used previously for batteries could be used for other purposes.

and can interface with other electronic devices including smart clothing lights sensors and musical instruments making it an affordable humanoid platform for research experimentation and education.

Measuring Electrical resistance Graphene merits in electronic devices and as a light bulb coating are still being debated. But new results suggest the atom-thick carbon sheet has one clear advantage:

they could be used widely in many applications including as exceptionally strong components in personal electronic devices, in space exploration vehicles,

low-cost method to build DNA NANOTUBES block by block a breakthrough that could help pave the way for scaffolds made from DNA strands to be used in applications such as optical and electronic devices or smart drug-delivery systems.

"The Promise of Supercapacitorssupercapacitors are used electronic devices to store an extremely large amount of electrical charges.

reliable and potentially safer power source for electric and portable electronic devices in future, said Singh.

Phones, laptops and other electronic devices all use memory chips to function. To be desireable they must be fast,

despite its extremely high conductivity, graphene has been used in few practical electronic devices. Three graphene-centric memory technologies have been described in different articles published in Nature Communications, Applied Physics Letters and Nano Letters journals.

and more secure way to communicate information between wearable electronic devices, providing an improved alternative to existing wireless communication systems,

which uses the body as a vehicle to deliver magnetic energy between electronic devices. An advantage of this system is that magnetic fields are able to pass freely through biological tissues,

The organic molecules of this chemical are used widely in electronic devices such as solar cells, LEDS and transistors.

will enhance or even replace the electronic devices that are ubiquitous in our lives today. But there's a step needed before optical connections can be integrated into telecommunications systems and computers:

using a new technique to incorporate vanadium oxide--a functional oxide--into the electronic devices.""It's tough to replace current transistor technology

This work will be reported at the IEEE International Electron Device Meeting, the leading forum for reporting technological breakthroughs in the semiconductor and electronic device industry, in December."

"For use in electronic devices, the semiconductor industry is interested primarily in three faces of a germanium crystal.

The aluminum battery is also flexible so it can be used in electronic devices that can fold and bend.

This phase, characterized by an unusual ordering of electrons, offers possibilities for new electronic device functionalities and could hold the solution to a longstanding mystery in condensed matter physics having to do with high-temperature superconductivityhe ability

The resulting current created by the signaling mechanism is sufficient enough to be picked up by simple electronic devices,

particularly as diodes form the basis of many microminiature electronic devices. Since then, a range of devices have been constructed,

the human body is becoming host to an ever-increasing array of electronic devices that need to wirelessly communicate with each other.

graphene is set to enable a stream of new electronic devices, including particularly sensitive sensors for the detection of various gases,

which promise to significantly boost the performance of next-generation electronic devices. This technology could also have specific uses in industrial and military applications,

"For use in electronic devices, the semiconductor industry is interested primarily in three faces of a germanium crystal.

Measurement of a single nuclear spin in biological samples May 11th, 2015graphene holds key to unlocking creation of wearable electronic devices May 11th, 2015new Method to Produce Dual Zinc oxide Nanorings May 11th

Measurement of a single nuclear spin in biological samples May 11th, 2015graphene holds key to unlocking creation of wearable electronic devices May 11th,

which promise to significantly boost the performance of next-generation electronic devices. The technology could also have specific uses in industrial and military applications

HILLS AND POTHOLES Many of these types of flexible electronic devices will rely on thin films of organic materials that catch sunlight

they could be used widely in many applications including as exceptionally strong components in personal electronic devices, in space exploration vehicles,

Reliable, ultrathin wearable electronic devices that stick to the skin like a temporary tattoo are a relatively new innovation.

The availability of stable magnetic skyrmions at room temperature opens up new studies on their properties and potential development in electronic devices,

"Our next steps include integrating these materials into functional optical and electronic devices

#Researchers from Kiel and Bochum develop new information storage device Scientists from Kiel University and the Ruhr Universität Bochum (RUB) have developed a new way to store information that uses ions to save data

The typical scale of eletronic transistors--the basis of contemporary electronic devices--is less than 100 nanometers

as electrical vehicles and personal electronic devices become more ubiquitous in our daily lives, it is becoming increasingly necessary to have more efficient systems for localized electrical power generation and effective cooling mechanisms.

Jilin University (China) and the University of Nottingham (UK) have developed a method that significantly prolongs the lives of charges in organic electronic devices("Organic Electronics:

Engineering Ultra Long Charge Carrier Lifetimes in Organic Electronic devices at Room temperature"."Silicon based chips and transistors have been at the heart of all electronic devices since the 1950s.

Driven by economic and environmental factors, and by the need for renewable energy resources, there is currently an enormous scientific and technological interest in transitioning away from silicon based electronics to new organic electronic devices.

Just like living organisms, organic electronics use carbon in complex molecules as their key functional component.

These new organic electronic devices are less expensive, more environmentally friendly and better recyclable than the older ones.

Today the most commercially successful organic electronic devices are OLEDS (organic light emitting diodes) found in smart phone displays.

) The team was able to design an organic electronic device in which charge generated by light lived approximately 10,000 times longer than was thought previously possible.

This opens up the possibility of creating entirely new classes of organic electronic devices such as ultra-sensitive photo detectors to image distant stars,

The dual-phase Mote2 transistor looks promising for use in new electronic devices as demand for components increases for materials that are small, light and extremely energy efficient n

"We see possible applications in thermoelectrics, batteries, catalysis, solar cells, electronic devices, structural composites and many other fields, enabling a new level of engineering on the atomic scale

and several kinds of electronic devices that are by nature transparent to visible light. Of particular importance are new materials that conduct electricity by using missing electrons, otherwise known as"holes."

they could be used widely in many applications including as exceptionally strong components in personal electronic devices, in space exploration vehicles,

Reliable, ultrathin wearable electronic devices that stick to the skin like a temporary tattoo are a relatively new innovation.

if perfected, could lead to a novel tabletop magnetic measurement technique and new, nanoscale electronic devices based on electrical spin, rather than charge.

"For use in electronic devices, the semiconductor industry is interested primarily in three faces of a germanium crystal.

and range from paper-based tools to expensive, sophisticated electronic devices. Our AAC device uses analogue signals in continuous form,

Learning from recent attempts to combine III-V and silicon materials in Finfet electronic devices, the Belgian team grew their laser structures directly onto a standard silicon wafer.

And Won't Catch on Fire Almost all of the electronic devices that we carry around with us all day now rely on one key,

"For use in electronic devices, the semiconductor industry is interested primarily in three faces of a germanium crystal.

Linbo3 is used in many electronic devices dealing with high-frequency signals such as cell phones or radar installations.

and some are familiar with the different magnetic phases that store data in our electronic devices and the liquid crystalline phases that are used to create an image on certain electronic displays,

including as exceptionally strong components in personal electronic devices, in space exploration vehicles, and as hydrogen storage materials in next generation batteries,"he added.

shorts the circuit and throws a wrench into the gears of any potential electronic device. In fact, according to University of Illinois-Urbana Champaign professor John Rogers, the purity needs to exceed 99.999 percent--meaning even one bad tube in 100,000 is enough to kill an electronic device."

"If you have lower purity than that, "he said, "that class of materials will not work for semiconducting circuits."

Some implications of this research are obvious--like using portable electronic devices for longer before charging

This effectively proved that these three-atom-thick semiconducting films can be made into multilevel electronic devices of unsurpassed thinness.

"For instance, the researchers studied a single atomic layer of a material that is interesting for future electronic devices."

The dual-phase Mote2 transistor looks promising for use in new electronic devices as demand for components increases for materials that are small, light and extremely energy efficient e

a technology applied to create electronic devices on a roll of flexible plastics or metal foils.

and range from paper-based tools to expensive, sophisticated electronic devices. Our AAC device uses analogue signals in continuous form,

and more secure way to communicate information between wearable electronic devices, providing an improved alternative to existing wireless communication systems,

which uses the body as a vehicle to deliver magnetic energy between electronic devices. An advantage of this system is that magnetic fields are able to pass freely through biological tissues,

Their discovery is interesting for the development of novel, energy-efficient electronic devices, particularly integrated circuits. A device based on spin waves could theoretically operate more efficiently than ordinary electronic circuits.

Hills and Potholes Many of these types of flexible electronic devices will rely on thin films of organic materials that catch sunlight

Eliminating the heat sink could allow more compact packaging of electronic devices --but only if electrical connection issues are addressed also.

which are used typically as components in optic and electronic devices. By decreasing the spacing between electronic circuits on a microchip, for example,

Having graphene still in the structures is not desirable for electronic devices which require an entire gap between the structures.

It is the most significant material for developing new types of electronic devices because of its many extraordinary properties,

This discovery is aimed at allowing manufacturers of electronics to develop the next-generation of electronic devices that will have much greater performance.

he said. ou could make electronic devices from these semiconductor crystals and grow them precisely in intricate patterns required for the device you want, such as thin-film transistors or light-emitting diodes. a

if perfected, could lead to a novel tabletop magnetic measurement technique and new, nanoscale electronic devices based on electrical spin, rather than charge.

Of course, electronic devices work differently phototransistors in digital cameras sense light, which is converted then into a long line of 1s and 0s,

and influence entire industry of electronic devices. In fact, since flexible phototransistor are used in cameras, it is likely that very soon we will soon see the results of this achievement in shape of better quality photos and videos y

so it has the potential for use in flexible electronic devices. Aluminium is also a cheaper metal than lithium. p

and other electronic devices eliminating the clunky brick that is commonly comes with a device's power cord.

So why aren't we seeing a flood of electronic devices on the market made from Gan now?

and reduces the size and cost of electronic devices. Massachusetts institute of technology, the brain trust from which CEI was hatched believes using Gan in data servers, electric vehicle inverters

The observation reported today provides a new property for two-dimensional materials such as molybdenum disulfide opening the potential for new types of mechanically controlled electronic devices.

The new technology is designed for conventional lithium-ion batteries now used in billions of cellphones laptops and other electronic devices as well as a growing number of cars and airplanes.

#More efficient transformer materials Almost every electronic device contains a transformer. An important material used in their construction is electrical steel.

Transformers convert the standard voltage from the wall outlet into the lower voltages required by electronic devices.

Wearable electronic devices for health and fitness monitoring are a rapidly growing area of consumer electronics; one of their biggest limitations is the capacity of their tiny batteries to deliver enough power to transmit data.

At the moment, the coin-sized batteries used in many small electronic devices have limited very ability to deliver a lot of power at once,

The idea of wireless charging is tantalizing--a vision of electronic devices that stay powered up without wall sockets,

ever since its inception with Aviram and Ratner's 1974 seminal paper, represents the ultimate in functional miniaturization that can be achieved for an electronic device."

Energousattup is a wireless charger for electronic devices. It can charge your cell phone and other battery-enabled devices on the go using something that is already abundantly flowing all around us radio waves.

Whereas brain-machine interfaces would require invasive surgery for brain implants he wants to connect electronic devices to the peripheral nerves at the site of the injury allowing people to control bionic limbs with their existing nerves

meaning electronic devices that alter feelings, perhaps under direct control of a patient thoughts and wishes. asically,

Helping to make circuit boards in small batches for prototyping new electronic devices is one possible application.

but it doesn't provide high enough performance for electronic devices and energy storage applications.""3-D networksinstead of using coconut shells,

Once connected to electronic devices, the scaffolds can be used to monitor neural activity, stimulate tissues and even promote regenerations of neurons.

they will be able to link to electronic devices to continuously monitor UV-levels and alert the user when radiation hits harmful levels.

The findings were reported in Journal of Materials Chemistry C. Silver has long been considered for the advantages it offers in electronic devices.

Its highly versatile nature makes it applicable for use in numerous electronics gadgets such as wearables, flexible displays and other sophisticated electronic devices."

and textiles, enabling the creation of unique wearable electronic devices, Hinestroza said. Taking advantage of cotton irregular topography, Hinestroza and his students added conformal coatings of gold nanoparticles,