| Melting point (29) |  |
| Thermal conductivity (48) | |
| Thermal expansion (15) | |
| Melting point (29) | |
| Thermal conductivity (48) | |
| Thermal expansion (15) | |
"but with plastics there's just one melting point, whereas with food it's different temperatures, consistencies and textures.
Working with approximately 1 million nanoparticles in water they heated the solution to a temperature just above the DNA linkers melting point
which sand, heated to its melting point, cools into solid glass. With enough sun, a large lens and an ample supply of sand, he figured he might be able to produce glassware.
Niobium also has a very high melting point nearly 2 500 degrees Celsius so devices made from these nanowires could potentially be suitable for use in high-temperature applications.
The manufacture of`super-black`carbon nanotube-based materials has required traditionally high temperatures preventing their direct application to sensitive electronics or materials with relatively low melting points.
The catalysts, tungsten-based bimetallic alloy nanoparticles of non-cubic symmetry, have high melting points and consequently are able to maintain their crystal structure during the chemical vapor deposition (CVD) process,
of which has a unique melting point. Mixing the nanoparticles together allows for creating unique thermal signatures.
This is despite the fact that the high-entropy alloy melting point is significantly lower than that of pure tungsten (around 2, 900 versus 3, 400 degrees Celsius.
because the metals have an incredibly high melting point. Instead of melting the metals to fuse them,
The same bonding that makes the molecules soluble for printing fabrication processes also leaves them prone to low melting points,
because the metals have an incredibly high melting point. Instead of melting the metals to fuse them,
Silver has a relatively high melting point--962 degrees Celsius or 1763 degrees Fahrenheit--so observation of any liquidlike behavior in its nanoparticles was unexpected quite Li says.
Hints of the new phenomenon had been seen in earlier work with tin which has a much lower melting point he says.
Niobium also has a very high melting point nearly 2 500 degrees Celsius so devices made from these nanowires could potentially be suitable for use in high-temperature applications.
New alloy has highest melting point of any known metal at 4, 126°C a new material with a higher melting point than any other known substance has been invented by scientists.
The exotic alloy, which is a combination of the rare metal hafnium, carbon and nitrogen, would only begin to melt into a liquid at temperatures of more than 4, 126°C (7,
460°F)- two thirds the temperature of the surface of the sun. The extreme melting point makes the metal a candidate for creating a real-life version of adamantium the almost indestructible fictional metal used to make Wolverine's claws in the X-men
Scientists develop the new material using computer simulations to calculate the optimal composition that would give the material its record breaking melting point.
and tested its melting point, the record for highest melting point will remain with a substance made using hafnium, tantalum and carbon (Hf-N-c),
which melts at a temperature 3, 526°C. The researchers calculated the formula for the new alloy (Hf-N-c) by simulating the physical processes that occur at the atomic level when a substance melts.
The behaviour of the atoms as a liquid also determines this melting point. They found their Hf-N-c alloy would absorb similar amounts of energy
They worked out its melting point would be 474°C higher than Hf-Ta-C. Professor van de Walle and Dr Qijun Hong,
Melting point isn't the only property that's important in material applications.''You would need to consider things like mechanical properties and oxidation resistance and all sorts of other properties.'
'So taking those things into account you may want to mix other things with this that might lower the melting point.'
that when heated above its melting point, reacts with the acid, and shifts to its colored form. each roll of paper has 85 feet of paper to print. compact and easy to use,
In the oven used for the synthesis, temperatures stay just below the melting point of tin oxide.
and to reach the melting point about 50 ps later("Imaging transient melting of a nanocrystal using an X-ray laser").
Once heating to close to their melting point the gold discs--diameter one micron-don't spread out over the surface
and release a large amount of heat energy (230 kj L#1). This heat energy stored is large at approximately 70%of the latent heat energy of water at its melting point.
< Back - Next >
Overtext Web Module V3.0 Alpha
Copyright Semantic-Knowledge, 1994-2011